Miray’s SFP-10G-AOC1m SFP+ Active Optical Cable (AOC) is a 10Gbps solution to10G Ethernet, and datacenter. The integrated cable transmits 10Gbps data in each direction over MMF with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. Miray SFP+ Active Optical Cables’s length is up to 300 meters on OM3 MMF.
Recommended Operating Conditions | Min. | Max. | Typ. |
Operating Temperature(°C) | 0 | - | +70 |
Supply Voltage(V) | 3.135 | 3.3 | 3.465 |
Supply Current(mA) | 140 | 150 | 170 |
Data Rate(Gbps) | - | 10.3125 | - |
Bit Error Ratio | - | - | 10-12 |
Input Swing (Differential)(mV) | 180 | - | 1200 |
Output Swing (Differential)(mV) | 300 | - | 700 |
Parameter | Symbol | Unit | Min | Typ | Max | Notes |
Optical transmitter Characteristics | ||||||
Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 |
|
Center Wavelength Range | λc | nm | 820 | 850 | 880 |
|
Laser Off Power | Poff | dBm | - | - | -45 |
|
Launch Optical Power | P0 | dBm | -6.0 | - | - | 1 |
Extinction Ratio | ER | dB | 3 | - | - |
|
Spectral Width(RMS) | RMS | nm | - | - | 0.45 |
|
Optical Receiver Characteristics | ||||||
Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 |
|
Bit Error Rate | BER | dBm | - | - | E-12 | 2 |
Overload Input Optical | PIN | dBm | 2.4 | - | - | 2 |
Power |
|
|
|
|
|
|
Center Wavelength Range | λc | nm | 820 | - | 880 |
|
Receiver Sensitivity in Average Power | Sen | dBm | - | - | -9.9 | 3 |
Los Assert | LosA | dBm | -26 | - | - |
|
Los De-Assert | LosD | dBm | - | - | -12 |
|
Los Hysteresis | LosH | dB | 0.5 | - | - |