This transceiver is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 1.25Gbps,it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 120km in single mode fiber.
Miray SFP transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature,laser bias current, transmitted optical power, received optical power and transceiver supply voltage.It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
Gigabit Ethernet/Fast Ethenet
Fiber Channel
SDH/SONET/ATM
Switch to Switch interface
Router/Server interface
Other optical transmission systems
Parameter | Symbol | Min. | Typical | Max. | Unit | |
Case operating Temperature | Industrial | TC | -40 |
| 85 | °C |
Extended | -5 |
| 85 | °C | ||
Commercial | 0 |
| +70 | °C | ||
Supply Voltage | VCC | 3.135 |
| 3.465 | V | |
Supply Current | Icc |
|
| 300 | mA | |
Inrush Current | Isurge |
|
| Icc+30 | mA | |
Maximum Power | Pmax |
|
| 1 | W |
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section: | ||||||
Center Wavelength | λc | 1530 | 1550 | 1570 | nm |
|
Spectral Width | σ |
|
| 1 | nm |
|
Side Mode Suppression Ratio | SMSR | 30 |
|
| dB |
|
Optical Output Power | Pout | 0 |
| +5 | dBm | 1 |
Extinction Ratio | ER | 9 |
|
| dB |
|
Optical Rise/Fall Time | tr / tf |
|
| 260 | ps | 2 |
Relative Intensity Noise | RIN |
|
| -120 | dB/Hz |
|
Output Eye Mask | Compliant with IEEE802.3 z (class 1 laser safety) |
| ||||
Receiver Section: |
| |||||
Optical Input Wavelength | λc | 1270 |
| 1610 | nm |
|
Receiver Overload | Pol | -7 |
|
| dBm | 4 |
RX Sensitivity | Sen |
|
| -32 | dBm | 4 |
RX_LOS Assert | LOS A | -45 |
|
| dBm |
|
RX_LOS De-assert | LOS D |
|
| -33 | dBm |
|
RX_LOS Hysteresis | LOS H | 0.5 |
|
| dB |
|
General Specifications: | ||||||
Data Rate | BR |
| 1.25 |
| Gb/s |
|
Bit Error Rate | BER |
|
| 10-12 |
|
|
Max. Supported Link Length on 9/125μm SMF@1.25Gb/s | LMAX |
| 120 |
| km |
|
Total System Budget | LB | 32 |
|
| dB |