The drilling rig adopts a composite rig, which is supported by two high-strength oil cylinders, and a set of hydraulic valves controls the rise and fall of the rig. It is extremely convenient and quick to operate, saving time and effort, and creating benefits for users to a large extent.
The chassis adopts rubber tracks, which has the advantages of lighter weight, lower life cycle cost, can reduce the noise of the vehicle's walking mechanism, reduce the vibration of the vehicle body, can greatly reduce fuel consumption, and can walk on urban roads without hurting the road surface.
Model No. | TMZ-1250 | |
Engine | QSB4.5-C160 III | |
Max.power output (KW) | 123 | |
Rated out put at 220 rpm(KW) | 119 | |
Electric system (V) | 24 | |
Fuel tank capacity (L) | 200 | |
1st circuit operating pressure (Mpa) | 0-22 | |
2nd circuit operating pressure (Mpa) | 0-22 | |
3rd circuit operating pressure (Mpa) | 0-20 | |
Hydr. oil tank capacity (L) | 400 | |
Feed length (mm) | 2500 | |
Feed force (KN) | 50 | |
Retraction force (KN) | 50 | |
Feed rate (m/min) | 0-10 | |
Retraction rate (m/min) | 0-10 | |
Fast feed rate (m/min) | 0-50 | |
Fast retraction rate (m/min) | 0-50 | |
Mode of Operation | Rotary/Percussive | |
Percussion Frequency (Times/min) | 0-1150 | |
Feed rate (m/min) | Low | 0-15 |
High | 0-60 | |
Retraction rate (m/min) | Low | 0-15 |
High | 0-60 | |
Percussion Frequency (Times/min) | 0-1150 | |
Max.torque At high speed(N·m) | 6000/4250 | |
Max.torque At low speed(N·m) | 12000/8500 | |
High rotating speed (r/min) |
0-92 0-144/ 0-64 0-100 |
|
Low rotating speed (r/min) |
0-46 0-72/ 0-32 0-50 |
|
Transport dimensions(L*W*H) (mm) | 5900*1500*2850 | |
Weight (Kg) | 8500 |
Crawler Hydraulic Drilling Rig Machine