DCL-Ex10 Ex20 dimension and parameters.pdf
Over torque protection small packaged explosion proof electric actuator
Features
Description
DCL explosion proof electric actuator can add over torque protection function inside cavity. Disc spring made in Germany with very long life span and very small deformation with frequently presses, are used to keep the over torque value set to be stable and no drift after long time operation.
Actuator can be used for over 90% explosive gas environment except for colliery. Motors and electronics are fire treated. The machining precise of the connection surface are strictly controlled and inspected from supplier to ensure the flameproof gap is small enough to block spark inside actuator. Aluminum housing is hard die casted with larger tonnage than common series electric actuator to be more dense and can suffer much larger explosive pressure.
CSA tests per UL and CSA standard, both for Zone system and Division system. CSA certification is obtained in 2022.
Specification:
Type | Ex05E | Ex10E | Ex20E | Ex40E | Ex60E |
Power | AC110V/AC220V | ||||
Output Torque | 50Nm | 100Nm | 200Nm | 400Nm | 600Nm |
Acting Time | 20S | 30S | 30S | 30S | 45S |
Turning Angle | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° |
Motor Power | 10W | 25W | 40W | 90W | 90W |
Rated Current | 0.24/0.15A | 0.57/0.30A | 0.63/0.35A | 1.12/0.64A | 1.18/0.67A |
Total Weight | 3.0kg | 5.0kg | 5.5kg | 9.5kg | 10.0kg |
Input Signal | 4-20mADC,1-5VDC,2-10VDC | ||||
Output Singal | 4-20mADC | ||||
Basic Error | not more than ±1% | ||||
Reciprocating Error | not more than 1% | ||||
Dead Space | 0.5%-5.0% adjustable | ||||
Damping Characteristic | 0 times | ||||
Repeating Error in Actuator | ≤1% | ||||
Insulating Resistance | 100MΩ/500VDC | ||||
Withstand Voltage Class | 1500VAC 1minutes | ||||
Protection Class | IP68 | ||||
Explosive-proof grade | Exd II CT4Gb | ||||
Installation Angle | 360°at any angle | ||||
Electric Interface | 2-M20*1.5 explosion-proof plug,clients should install corresponding explosion-proof cable connector when using according to the cable selected. | ||||
Ambient Temperature | -20℃~+60℃ | ||||
Optional Function | Over-torque protector/Dehumidify Heater/Passive contact switch | ||||
Remark | Any other input or output signal needed, please specified in purchase order. |