Potentiometer equipped electric 3 phase actuator with resistance signal feedback for valve position
Features
Specification
Actuator Type | Standard Time/Torque | Optional Time/Torque | Turning Angle(Max.range) | Total Weight | Power Supply | Selected Control Circuit |
DCL-02 | 15S/18Nm | 7S/9Nm 60S/18Nm | 0~90°Adjustable | 1.2Kg | DC24V/AC24V AV110V/AC220V | Types of A/B/E/G |
DCL-05 | 20S/50Nm | 4S/20Nm 10S/30Nm 60S/50Nm | 0~360°Adjustable | 2.5Kg | DC24V/AC24V AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/G/H |
DCL-10 | 30S/100Nm | 15S/50Nm 60S/100Nm | 0~360°Adjustable | 4.5Kg | DC24V/AC24V AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/G/H |
DCL-20 | 30S/200Nm | 15S/100Nm 60S/200Nm | 0~90°Adjustable | 9Kg | DC24V/AC24V AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/G/H |
DCL-40 | 30S/400Nm | 15S/200Nm 60S/400Nm | 9.5Kg | |||
DCL-60 | 45S/600Nm | 10Kg | ||||
DCL-100 | 30S/1000Nm | 15S/500Nm | 0~90°Adjustable | 19Kg | AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/H |
DCL-160 | 48S/1600Nm | 19.5Kg | ||||
DCL-250 | 75S/2500Nm | 20Kg | ||||
Performance Parameters List of Adjusting type(Type E) | ||||||
DCL-MZZ | 18Nm | 3r | 1.2Kg | DC24V | Type MZZ | |
DCL-10GE | 30S/0~100Nm | 15S/0~100Nm | 0~90°Adjustable | 4.5Kg | DC24V±10% | Type GE |
DCL-40GE | 30S/100~600Nm | 15S/100~400Nm | 9.5Kg |
Actuator Type | Butterfly Valve(≤PN1.0MPa) | Ball Valve(≤PN1.6MPa) | Vent Valve(≤PN0.1MPa) |
DCL-02 | ≤DN40 | ≤DN32 | |
DCL-05 | DN50~65 | DN40 | DN50~80 |
DCL-10 | DN80~100 | DN50~65 | DN100~200 |
DCL-20 | DN125~150 | DN80~100 | DN250~300 |
DCL-40 | DN200 | DN125 | DN350~450 |
DCL-60 | DN250 | DN150 | DN500~600 |
DCL-100 | DN300 | DN200 | DN700~800 |
DCL-160 | DN350~400 | DN250 | DN900 |
DCL-250 | DN450~600 | DN300~350 | DN1000~1200 |
Description
The DCL-H series actuators motorized by 3 phase AC power. Actuators can have both clockwise (CW) and counter-clockwise (CCW) control inputs. One drives the actuator to its open, the other to its close position. If there is no signal (Null point) on either input the actuator simply stays in its last position. Actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive.
Unique integral motor/housing design provides higher torque in a very small package. Thermostatically controlled anti-condensation heater will help protect actuator against damage from condensation. Actuators are tested to rigorous UL and CSA standards and certified by CSA.