3 phase electric actuator with position transmitter / 4-20mA full range output for valve
Description
DCL F model electric actuator is equipped with self-developed position transmitter to output 4-20mA analog signal of valve position. It can be widely used in 3-point floating control system to drive quarter turn butterfly valves, ball valves or dampers. This kind of control system can obtain continuous analog signal of valve position signal to decide when to cut off power or reverse power direction.
The duty cycle of actuator is 70% or higher, For on-off type, actuator can keep working for 20mins without stop. For modulating type, actuator can start 1200times/hour. Whole full range open & close life cycle is over 10000 times and 200000 times start up.
Actuator has been rigorous tested by CSA per UL and CSA standard. The duty rate can be over 70% for all series. The EPS system is self-calibrating which virtually eliminates "hunting" and provides an output position monitoring signal as standard.
Specification:
Name: | 3 Phase Electric Actuator |
Installation Angle: | 360° |
Motor Power: | 8W To 140W |
Protection Grade: | IP67 NEMA4/4X |
Output Signal: | 4-20mA |
Standard Time/Torque: | 20S To 75S/50Nm To 2500Nm/442in.lbs To 22125in.lbs |
Total Weight: | 2.5KG To 20KG |
Ambient Temperature: | -25℃~+55℃ / -13°F~+131°F |
Power Supply: | 24VAC/110VAV/220VAC |
With: | Position Transmitter |
Actuator Type | Standard Time/Torque | Optional Time/Torque | Turning Angle(Max.range) | Total Weight | Power Supply | Selected Control Circuit |
DCL-02 | 15S/18Nm | 7S/9Nm 60S/18Nm | 0~90°Adjustable | 1.2Kg | DC24V/AC24V AV110V/AC220V | Types of A/B/E/G |
DCL-05 | 20S/50Nm | 4S/20Nm 10S/30Nm 60S/50Nm | 0~360°Adjustable | 2.5Kg | DC24V/AC24V AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/G/H |
DCL-10 | 30S/100Nm | 15S/50Nm 60S/100Nm | 0~360°Adjustable | 4.5Kg | DC24V/AC24V AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/G/H |
DCL-20 | 30S/200Nm | 15S/100Nm 60S/200Nm | 0~90°Adjustable | 9Kg | DC24V/AC24V AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/G/H |
DCL-40 | 30S/400Nm | 15S/200Nm 60S/400Nm | 9.5Kg | |||
DCL-60 | 45S/600Nm | 10Kg | ||||
DCL-100 | 30S/1000Nm | 15S/500Nm | 0~90°Adjustable | 19Kg | AV110V/AC220V/AC380V | Types of A/B/C/D/E/F/H |
DCL-160 | 48S/1600Nm | 19.5Kg | ||||
DCL-250 | 75S/2500Nm | 20Kg | ||||
Performance Parameters List of Adjusting type(Type E) | ||||||
DCL-MZZ | 18Nm | 3r | 1.2Kg | DC24V | Type MZZ | |
DCL-10GE | 30S/0~100Nm | 15S/0~100Nm | 0~90°Adjustable | 4.5Kg | DC24V±10% | Type GE |
DCL-40GE | 30S/100~600Nm | 15S/100~400Nm | 9.5Kg |
Features