DC motorized rotary actuator with F-class insulation rate motor / thermal overload protection
Description
All DCL electric actuators uses special formulated copper alloy worm gear. Worm gear is monolithic casting with this material instead of plating copper on the surface, which increases its overall strength and abrasion resistance ability.
The easiest broken part for electric actuator is the last stage worm gear or spur gear, because it is close to the output drive and suffers the biggest torque and friction. So last stage worm gear directly influences the operation life time of actuator. So DCL designs large worm gear with longer radius(arm) to make the force on wheel teeth less, when same torque added. Moreover, instead of plating copper to the surface, DCL actuator’s whole worm wheel is definitely totally built by bronze alloy.
Gear runout also affects the transfer noise and mechanical life. DCL has a very professional SQE team to control parts quality from suppliers. Every cover, bearing, gear and electronics must be tested before receipt to warehouse.
Specification:
Performance Parameters | ||||
Type | DCL-10GE | DCL-40GE | ||
DC24V±10% | DC24V±10% | |||
Motor Power | 30W | 70W | ||
Max Current | 3.3A | 1.8A | 8.9A | 6.6A |
Action Time | 15S | 30S | 15S | 30S |
Output Torque | 0~100Nm Optional | 100~400Nm Optional | 100~600Nm Optional | |
Total Weight | 4.5kg | 9.5kg | ||
Input Signal | 4~20mADC | |||
Output Signal | 4~20mADC | |||
Basic Error | no more than ±1% | |||
Reciprocating Error | No more than 1% | |||
Dead Space | 0.5~5.0% adjustable | |||
Damping Characteristic | 0 times | |||
Repeating Error in Actuator | ≤1% | |||
Turning Angle | 0~900 Adjustable | |||
Insulating Resistance | 100MΩ/250VDC | |||
Withstand Voltage Class | 500VAC 1 minutes | |||
Protection Class | IP67 | |||
Installation Angle | 3600 at any angle | |||
Electric Interface | Two G1/2 Wate-proof Cable Connectors,one for power line and one for signal line | |||
Ambient Temperature | -25~+55℃ | |||
Optional Function | Heater/Passive contact switch/Dome indicator |
Features