Halogen Lamp Bulb 12v 55w Quartz Glass 400 Hours Halogen Car Bulbs

Description Of Quartz Halogen Bulb

Quartz Tungsten Halogen (QTH) lamps are a common alternative to arc lamps. Compared with arc lamps, QTH lamps have better output stability, do not produce strong ultraviolet radiation, have no obvious peak lines in their output spectrum, and do not produce toxic ozone. These advantages over traditional arc lamps make QTH lamps ideal for radiometric and photometric applications and as excitation sources for visible to near-infrared light.

High intensity visible to NIR output with minimal UV radiation
Output spectral curve smooth
A variety of lamp power optional
Some bulbs can be mounted on bases in bare air

Specification Of Quartz Halogen Bulb

Application Of Quartz Halogen Bulb

A. Quartz Halogen Headlights
B. Quartz Infrared Heater Bulbs
C. Stage Light Halogen Bulb
D. Television Light Bulb
E. Quartz Halogen Spotlight Bulb
F. Tungsten Halogen Projector Lamp
G. Microscope Light Bulb
H. Aircraft Navigation Light Bulbs
I. Instrument Light Bulbs
J. Studio Lamp Halogen
K. Aircraft Halogen Lamp
L. Film Light Bulbs
M. Movie Light Bulb
N. Halogen Display Optic Lamp
O. Halogen Photo Optic Lamp
P. Quartz Lamp Iodine
Q. Marine Halogen Lights
R. Halogen Boat Lights
S. Auto Headlight Bulbs
T. Car Projector Headlight Bulbs
U. Medical Light Bulbs
V. Surgical Lamp Light
W. Locomotive Headlight Bulb
X. Railway Train Headlamp

ETC.

Catalogue Of Quartz Halogen Bulb

Tips to Improve the Life Of Quartz Halogen Bulb
➊ Keep the surface of the bulb clean, and do not touch the glass part of the bulb directly with your hands during use
If there are fingerprints, wipe with a dry cloth dipped in alcohol.
❷ Try to avoid strong vibration before and after using the bulb, and handle it with care to avoid burning the filament.
❸ The light bulb will generate high temperature during use, so please do not touch it with your hands, and do not use flammable and explosive items
near.
❹ The filament is brittle just after the bulb is turned off, so avoid vibration, do not move it immediately, and
Try to move the filament only after it has cooled down.