Geometric pattern floor medallion in marble 10 years of factory major in export

Five steps of making Medallion

1. Draw the computer file. According to the design requirements, we draw the medallion pattern on the drawing paper, copy it on the three plywood with carbon paper, and mark what kinds of stones are used in each pattern. According to the pattern of connection between the trend, write the number, in order to prevent. Then, with sharp cutters, we will cut out the graphics and dies by small pieces of lines along the lines. Cut the line to the vertical medium, not oblique, arc angle walk.

2, Accurate material selection, open material pre - width. There are many kinds of stones in medallion, such as red, white, black and so on. Some of the same colors are also shallow. When selecting materials, we must choose the slates with clear texture, fine grain, pure and consistent color and no cracks according to the requirements of the drawings. According to the shape of the mold, the specifications describe in selected blocks of stone, a part of the choice of cutting. When to leave the peripheral cutting allowance, pre 1-2mm wide, to go to remedy.

3, Carefully grinding, grouped together. The part of the cut pattern is slowly grinded to the connecting line, and the position is identical. The small amount of sticky material is used for positioning, and then the glue is applied to the whole pattern. When bonding, the connection of each small pattern is divided into several groups, first from the center to stick together, then grinding and gluing separately, then the group is combined with the group, and then joins the border with the frame, so that the stitching is orderly, the work efficiency is fast, the quality is good, and it is not easy to walk.

4, Coloring the seams and strengthening the net. When the whole pattern is spelled, it is mixed with epoxy resin, stone powder and color material. When the color is similar to the stone color, a small amount of drier is added to the mixture, and it is quickly infiltrated into the gap of the connecting to the position, and then the surface color is scraped. Lay up the gauze net, sprinkle stone powder and spray the resin evenly, and make the gauze mesh bonded to the stone plate.

5, Polishing and polishing. Stick good Medallion stone flat on the grinding table, and grinding smooth, the sand road, waxed and polished.

To say is a way, to do is another way. Factory management also concern the staff's emotion and moral level. Though there are a lot of work, but most people will submit to its commitment, a promise is a promise, to achieve the goal by managing to find our a way and give our customers the best products! Surely, all hardship and difficulties will be wiped out when we work with a willing heart and positive attitude!

Labor is not a curse, and pressed by the labor is a heavy burden!

Product detail

Factory corners:

Regular medallion tile Packing:

a design a carton,

cartons / pallet, 13-15 pallets / 1*20'FCL