Wooden quartzite with golden veins culture stone high quality elegant decor

Natural cultural stone VS Artificial culture stone

Requirements to choose a culture stone

Quality Control standard

If 600mm length Range of error < 10.0mm, width <0.7mm

Natural cultural stone

It is a stone deposit mining in nature, of which slate, sandstone and quartzite are processed to become a kind of decorative building materials. The natural culture stone is hard, bright color, rich in texture and different in style. It has the advantages of compression, abrasion resistance, fire resistance, cold resistance, corrosion resistance, low water absorption and so on. The main features of natural culture stone are durable, not afraid of dirty, and can be scrubbed indefinitely. But the original decorative stone texture by the restrictions, in addition to a square stone, other construction is more difficult, especially when stitching.

Artificial culture stone

Artificial culture stone is made of pumice, ceramsite, calcium and other highly processed and refined, the use of high technology to each stone texture and color of natural form, texture upgrade is reproduced in the manual method, the effect of a primitive, natural, rustic charm. The high grade artificial culture stone has the characteristics of environmental protection, energy saving, light texture, rich color, no mildew, non flammable, good anti thawing, easy to install and so on.

yellow culture stone packing:

6-7 sheets / box / 600*160*175mm, 60 boxes / crate , 18 - 20 crates / 1*20'FCL

yellow culture stone detail

Tips of pastering culture stone:

The construction of cultural stone is very different from the ordinary wall construction.

1 clean and make walls with rough surfaces, such as wood and plastic is low water absorption layer should be smooth, barbed wire, and make the rough bottom, full maintenance after putie.

2, before laying rock, we must first arrange the rock on the flat ground and arrange the best effect, then lay it in order according to the arrangement, and the rock with similar size, shape and color should not be adjacent.

3 425 above the white cement, ordinary cement (cement: Sand: 801 glue water ratio is 1:2:0.05), ceramic adhesive (pay attention to the use of adhesive), high performance special adhesive can be used as an adhesive.

4 to fully wet the rock, apply the adhesive to the bottom of the rock, and pile up the shape of the mountain.

5 First, stick to the corner. Full press, so that the rock can be seen around the adhesive extrusion (part of the product does not need to turn the corner).

6 If the construction needs to be needed, the rock can be cut to adjust.

7 fill the gap with plastic bags to fill in the gap, pay attention to the depth, the deeper the gap, the better the product's three-dimensional effect.

8 grout initial setting, with the bamboo and other excess sealant removal, repair the gap surface with wet brush, such as accidentally stuck to the surface of a small amount of rock sealant or adhesive to dry, with a brush to remove. Better. Some products do not have to be slit.

9 the rock used in outdoor, after paving, the product and the sealant can be completely dry after protective treatment spraying protective agent (waterproof, anti freezing, anti UV, anti alkali etc.).

10, the requirement for the slit is treated (1) the disorderly rock - the smallest seam is around 10mm, and the difference in the size of the disorder is adjusted by the filling agent