China white marble with grey veins slabs in 18/20/30mm xiamen service lowest price

China white marble with grey veins like Italy Carrara, our own quarry direct sale salbs in thickness of 18/20/30/50mm

International marble collectively marble, with its natural beauty of texture, color is bright, is widely used in building interior wall, because the marble material is loose, soft water absorption rate is relatively high. There are many joints. Therefore, during the process of processing, transportation, installation and use, all kinds of pollution and warpage, such as loss of light and so on, are easy to occur, which affects the decoration effect. Therefore, the nursing of marble is also a required course in the nursing industry. In order to compare and analyze the situation of marble veneer, the methods of nursing can be divided into:

1: refurbishing grinding treatment. 2: local drop treatment. 3: cleaning and protective treatment. 4: Crystal polishing treatment. 5: seamless filling and so on.

The construction technology of marble grinding and crystallizing and polishing treatment:

In the first renovation before grinding first waterproof, the purpose is to make the stone water less as far as possible, so as to reduce the water absorption rate of stone, water again after 300#, at that time because the grinding will cause the waterproof effect is reduced or disappeared, the conditions allow the best 800# after a water proof.

Encountered in loose stone, such as cream, Sha Yan, tropical rainforest, wood stone etc. first with high content of seal curing agent (such as super hard coatings, inorganic content of more than 40% silicone sealant) before treatment, to fill in the loose stone also hardened material.

1, coarse grinding: using 50#, 150#, 300#, 500# diamond hard resin grinding block (coarse grinding grinding grinding do not use soft water, prone to wave, affecting the flatness) to coarse grinding of older water but remember not too much, each end mill to thoroughly check water, cutting abrasive left deep scratch if 50# mill fell, and so on, the machine go well shaped grinding, coarse grinding, grinding time is the total 45%, to ensure the completion of the project quality acceptance of the Guan Jian link.

2, fine grinding: use 800#, 1000#, 2000# diamond resin soft grinding, fine grinding accounted for the overall research 35% time, fine grinding to 800# after the beginning of light, fine grinding to 2000# degrees up to 50 degrees after ze.

3, grinding: use 3000# diamond resin grinding grinding, soft water spraying A2 by ion exchange, grinding the total 20% grinding time, grinding after lifting high gloss surface, improve the density of Dali stone, as a polishing agent (NO2+Q5 mirror repair agent) to lay a solid foundation to improve the polishing material adhesion.

4, the use of polishing: power of more than 2HP, speed 175-210 R / min, the weight of 45-70 kg, crystal face fur content of 70% fur pad, 3M mat, mat, marble mirror with nano complex cream NO2, 2X mirror lock knife into the milk Q5 polishing and grinding, polishing the marble surface gloss is at least in the 90 - 100 degrees.

China white marble beauty same as carrara ones from Italy:

Block

Wall cladding by chin white marble: