Geometric pattern floor medallion do OEM designs shuitou production center

Water jet cutting is ordinary water after a super high pressure compressor pressurized to 4000 bar (60000psi), and then through a small nozzle (the diameter is 0.004 inches to 0.016 inches), can produce up to 915 meters per second (about three times the speed of sound) water arrows, and sand material the water flow arrow to enhance its cutting ability, can cut all kinds of stone, glass, ceramics, tiles and other materials.

Water jet nozzle is made of hard alloy, sapphire and other materials, the nozzle diameter is only 0.05 mm, and the hole wall is smooth, can withstand the pressure of 1700 MPa, high pressure water so blown out like a knife cutting material. Some water also added a number of long chain polymers, such as polyethylene oxide, to increase the "viscosity" of water, making the sprayed water like a "fine line". Its machining precision is high, the cutting width is only 0.1 - 0.8 millimeter, and the complex parts can be machined.

Stone production process has many processes! First of all, the design department confirmed with the customer consistent color, the color and the CAD diagram to the computer room computer produced drawing.

Computer graphics include:

1. Point layer (dividing a layer to separate the different colors of the material)

2. Typesetting (the dispersed components are arranged regularly according to the size of the actual material)

3. Treatment

4. Compiling

5. Audit

6. Decomposition drawing

The cutting member input file path according to the computer drawing , the water jet machine automatic processing can be cut out and all the objects shown in the drawing.

The cutting is finished to parquet parquet process, is a completely manual job. The parquet also should be cut out of the bottom edge parts grinding smooth, easy to display the mosaic, mosaic by computer drawing trial spell is the puzzle typesetting. Try to spell after AB glue paste, in order to make the surface smooth graphics, paste graphics on the surface of the glass table, but also with iron pressure setting. Such as viscose dried, with iron will in turn in the surface above the puzzle glue, then rinse with water.

Whether it is stone or ceramic mosaic before packing to go through strict quality inspection, including the overall size, surface smooth, clean, counterpoint, color lines and so on, to pay all the quality requirements for packing. Because the stone mosaic, ceramic mosaic is a fragile product, so the packaging requirements are very high, with transparent grease proof paper wrap the surface of the product, pre-imitation scratch, then the bubble edge, avoid broken, finally fixed with wooden packaging, labeling, the whole production process is completed.

Product detail

Regular medallion tile Packing:

a design a carton,artons / pallet, 13-15 pallets / 1*20'FCL