Queendom Technology
model:3WMulti-Color High Power LED's -Imitation Lumen Series
Peak parameters:
Note:1. Derate linearly as shown in Figure 4 for temperature above 25°C.
Product number::Absolute Maximum Rating(At TA=25°C)
Notes:
Luminous intensity is measured with a light sensor and filtercombination that approximates the CIE eye-response curve.21/2
is the o-axis angle where the luminous intensity is 12the peak intensity.c.The dominant wavelength (d) is derived from
the CIEchromaticity diagram and represents the single wavelength which defines thecolor of the device.
product properties:
Main chips: US Preh, Cree CREE, Toyoda Gosei, Osram NICHIA, CREE, Preh,Xuming, Epistar, New Century
Chip specifications: chip sizes such as 10*30mil, 14*28mil, 38*38mil,40*40mil, 45*45mil, etc.;
Material selection: high temperature resistant Japanese glue, 99.99% puregold wire welding;
Power factor: general power numbers are: 0.25w, 0.5w, 1w, 3w, 5w, 8w, 10w,etc. The main brightness unit is lm (lumens)
Package form: in-line, SMD, imitation lumen medium and high power
Colloidal color: can be customized according to requirements: [coloredfog, colorless fog, colored transparent, colorless transparent]
Luminous color: can be customized according to requirements: white, red,orange, yellow, ordinary green, emerald green, blue, two colors
Light emitting angle: 15-130±5° (the angle can be adjusted according tocustomer requirements)
Product features: high light efficiency, anti-high temperature, anti-deadlamp, anti-static
Certification standards: SGS certificate in line with EU ROHS, EN60425, CEstandards
package: