200W Laser Welding Machine for Mould Repairing Diamond Rod YAG Diode Laser 100 J

Introduction

Robot300M laser welding machine for mould repairing is is especially designed for the mould industry,which is applied to repair precision moulds.

The mould repairing can make full use of the original moulds, which will greatly reduce the production cost, and improve the working efficiency. The technology can also be applied to modification of mould design or size, thus reducing the development cycle of the product.

By controlling laser width, energy, top power and repitition frequency to melt workpieces , form a special melting pool, the processing type is heat transmission, processing work pieces surface by laser radiation , heat transmit from surface to bowel.

Machine Advantages

1. The ceramic focusing cavity is corrosion and high temperature resistant, and the service life is 8 to 10 years, while the service life of the xenon lamp is over 8 million times.

2. World-leading automatic light shielding system is employed to remove stimulation of light on eyes during operation.
3. The laser head can be turned for 360 degrees, and the whole optical path can be turned 360 degrees too, up and down by motor,front and after adjustable, especially suitable for repair of large, medium and small-sized moulds.
4. Intelligent remote controllers are employed for adjusting parameters, with simple and convenient operation.
5. The workbench can be adjusted up and down with three-dimensional moving.
6. The light spots can be adjusted in size.

7. Imported X lamp and rod

8. High quality optical system

9. Big flow water chiller for cooling system

10. Electrical up and down table for focus

Specification data sheet

Laser Welding Jewelry Machine For Mould Repairing.pdf

Consumable

Applications

It is applicable to metallic materials such as cold working high alloy steel, hot forging high alloy steel, nickel tool steel, high grade steel, copper alloy, beryllium steel, and high flexibility aluminum alloy. The remote controller or the touch operation panel can be used to select the laser output power, frequency, pulse width and other parameters. The moving speed of the workbench can be set to manipulate the workbench moving, so that the welding parameters match the welding requirements, and thus producing optimal effect of smooth welding joints and points.

Laser source

Machine outlook

FAQ

1 Q: What is the warranty of the machine?

A: The warranty is 1 year, but whole life after-sale service.

2 Q: What is the payment term?

A: T/T, L/C, Westen Union, etc.

3 Q: What is the service

A: Engineers can offer oversea services .

4 Q: How about the quality?

A: Germany high technoloy.

5 Q: How is the operation?

A: We offer operation manual and videos.