TC Type Terminal Block
Product parameters
Shell material:Engineering plastics
Screw material:iron
Conductive material:Copper pieces
Features
1. The shell is made of high-quality engineering plastic, with high flexibility, and will not break under low temperature conditions. The surface is smooth and clean, and the edges of the shell are neat and beautiful.
2. Small size, good conductivity, closed-shaped screw guide hole, which can not only facilitate operation, but also prevent the screw from falling out of the machine.
The scope of application
TC is suitable for AC 50Hz or 60Hz rated voltage up to 600V, rated current up to 600A circuit for connection between wires. This series of products using screw crimp connection, the wire end to be crimped connection nose to connect with the terminal. Use screws to install.
Item No . | Rating | Number of Poles | Wire Section(mm²) | Dimension(mm) | ||
L | W | H | ||||
TC-602 | 60A 600V | 2 | 6-14 | 56 | 43 | 32.5 |
TC-603 | 3 | 85 | ||||
TC-604 | 4 | 112 | ||||
TC-1002 | 100A 600V | 2 | 10-22 | 68 | 55.4 | 37.8 |
TC-1003 | 3 | 104 | ||||
TC-1004 | 4 | 136 | ||||
TC-1503 | 150A 600V | 3 | 40-60 | 117 | 67 | 40.8 |
TC-1504 | 4 | 157 | ||||
TC-2003 | 200A 600V | 3 | 60-100 | 134 | 72 | 46.5 |
TC-2004 | 4 | 177 | ||||
TC-3003 | 300A 600V | 3 | 100-150 | 164 | 90.5 | 50.6 |
TC-3004 | 4 | 220 | ||||
TC-4003 | 400A 600V | 3 | 150-200 | 164 | 90.5 | 50.6 |
TC-4004 | 4 | 220 | ||||
TC-6003 | 600A 600V | 3 | 200-300 | 205 | 100 | 75 |
TC-6004 | 4 | 275 |