Product Description:

Features:

• Product Name: Upright Roll Forming Machine for Double Sides Profile
• Cutting Length Tolerance: ±1mm
• Roller Material: Cr12, heat treatment
• Material Type: GI
• Cutting System: Hydraulic Cutting

Drawing:

Technical Parameters:

ROLL FORMING MACHINE FOR UPRIGHT PROFILE(DOUBLE SIDES)
Material Specification
Thickness	1.5mm to 2.0mm or customized
Size	YX50.3/56.5-80,YX59.8/66.5-90
Material	GI, cold rolled steel
Yield strength	250MPa or customized
Machine Components
5Ton*600mm Hydraulic Decoiler
Coil inner hole expanding	Hydraulic system, 3KW pump motor
Speed regulating	Frequency inverter, 3KW motor
Expanding type	Taper wedge expanding system
Load capacity	Max.5Tons
Coil Inner-diameter	510±30mm
Coil width	Max.600mm
Stop/start rotation	Automatic stopping device with limited switch to assist
Pre-leveler and Power Feed-in Device (DOUBLE SIDES)
Power Feed-in Rollers
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
Power	5.5KW
100 Tons Press
Servo motor feed-in device	3KW
Quantity of pressing tools	5 sets
Mateiral of pressing tool	Cr12Mov, heat treatment
Holes patten	Customized
Hydraulic Pre-shearing Device(as an Option)
Function	Smart cut control, to cut off the end of the final piece of sheet
Mateiral of cutting tool	Cr12, heat treatment
Roll Forming Machine
Driving system	Gear/sprocket
Forming station	Double sides, each side 18 stations
Roller material	Cr12, heat treatment, HRC58~62
Shafts Diameter	Φ75mm
Motor to drive	18.5KW, two sides share the same motor, doesn't work at the same time
Size changing	By spacer
Production speed	Approx. 8m/min to 10m/min
Hydraulic Non-Stop Cutting device
Cutting type	Non-stop cut, no blanking cut
Quantity of cutting tools	2 sets
Cutting tool material	Cr12, heat treatment
Hydraulci pump motor	11KW
Air souce supply	By user
PLC Control System
Function	Control quantity, punching and cutting length automatically
PLC	Siemens
Touch screen	Siemens
Inverter	Schneider or Delta
Encoder	Omron
Cut-to-length tolerance	≤±1 mm
Punching tolerance	≤±1 mm
Control Voltage	24V
Product Rack	Un-powered, 6 meters
Option	Pneumatic unloading rack

Applications:

The Racking System Roll Forming Machine from XIAMEN FUMING is designed to manufacture shelf and upright profiles for racking systems from galvanized steel with a material thickness up to 2.0mm. This roll forming machine is equipped with a hydraulic cutting system, ensuring a precise cutting length tolerance of ±1mm. This roll forming machine is suitable for metal sheet processing and is widely used in storage system.

Support and Services:

FAQ:

Q 1: How can customers be assured that XIAMEN FUMING will deliver qualified roll forming machines?

A 1: Customers can send their technician or entrust a third party to XIAMEN FUMING’s factory to do machine inspection before delivery.

XIAMEN FUMING can send their engineers to the buyer’s factory for machine installation and commissioning.

Our roll forming machine is guaranteed for one year in correct operation and maintenance.

Q 2: How does the customer install the machine when it arrives?

A 2: Our engineers will go to your factory for machine installation and commissioning once you get your machine ready(including electricity, testing material, hydraulic oil, auxiliary staff, transport and lifting device, etc.), they will instruct your technician how to operate the machine. Online supports including video call will be provided if our engineers cannot visit your place because of pandemic.

Q 3: Does XIAMEN FUMING provide customized roll forming machines?

A 3: Yes, we design and make roll forming machines according to the latest market trend and the specific requirements suggested by customers.