NYSP-L864 (Soft Cable Type) RF Admittance Switch
NYSP RF Admittance SwitchTechnical Parameter
Applications | vertical top installation, can be used as coal conveyer |
Material | 304+PTFE (optional) |
Probe rod length | 500mm (customizable as required) |
Power supply | 24VDC, 220VAC (optional) |
Process temperature | -40 〜+130 °C |
Process pressure | 0~ 2.0MPa |
Process connection | Thread, flange (optional) |
Time delay | 0〜30s adjustable |
Power loss protection | open, close, field switchable |
Output relay | double pole, double throw (DPDT) output,5A, 24V DC or 5A, 220VAC |
Protection grade | IP67 |
Explosion-proof grade | Exia IICT6 (optional) |
※ Note: Products can be customized according to the specific requirements of users!
NYSP RF Admittance Switch Installation requirements
- Check: Carefully remove the RF admittance level switch from the box and check for transport damage.
- Probe installation: The standard installation method is 1 "NPT thread installation, or flange installation, horizontal or vertical installation, the outside dimensions of the probe rod out of the container as shown in figure 1,
- Turn the 1 "NPT thread of the probe into the 1" NPT connector at the top of the container or wall. ◎ RF admittance level switch NYSP-L865 recommended installation diagram as shown in figure 2,

Note:
When the RF admittance level switch is installed horizontally, the length of the probe cover G must be extended into the wall of the port; in vertical installation, the total length of the probe S must be equal to or greater than the position of the control point.
NYSP RF Admittance Switch Application Field
◎Foundry machinery: sand level detection.
◎Environmental protection water treatment: detection of sewage liquid level.
◎Hydraulic machinery: detection of lubricating oil level.
◎Constniction machinery: testing material level of cement warehouse and mixing tank material level.
◎Flour mill: flour, wheat grain material level.
◎Feeding Plant: detection of Soybean meal level.
◎Power plant: detection of fly ash level.
◎Glass factory: testing quartz sand and broken glass level.
◎Chemical factory: detection of polyester, spandex, acid, alkali and other chemical materials liquid level.
◎Boiler plant: check drum water level, and other pressure vessel liquid level.
◎Other applications: natural gas,juice? ketchup, etc.