Highly sensitive NYYCUK-C tuning fork level switch for accurate measurement Hersman connector
NYYCUK-C Tuning Fork Level Meter Overview
NYYCUK-C Tuning Fork Switch Working Principle
NYYCUK tuning fork level switch is a new type of level switch. It is designed and manufactured using the principle of tuning fork vibration. It is on the base of the induction rod of the tuning fork level switch, the tuning fork rod is driven through the piezoelectric chip, and the vibration signal is received by another piezoelectric chip, so that the vibration signal can be circulated, and the induction rod can be resonated. When the material is in contact with the induction rod, the vibration signal gradually becomes smaller, until the resonance stops, the control circuit will output.
The principle is that the sensitivity of the dry and salty bar is gradually weakened from the front to the back seat, so when the material in the barrel and the surrounding of the barrel are piled up, and the bell and the bar base (rear) or discharge, there will be no error. Set up signal. Simply put, the sound produces mechanical vibration under the excitation of the piezoelectric product, and this vibration has a certain frequency and amplitude. When the tuning fork is submerged in liquid or solid, the vibration frequency and amplitude of the tuning fork will change. This frequency change is detected by the electronic circuit and outputs a switch value.
Typical application | Liquid |
Fork material | 304, 316 ( optional) |
Fork length | 100mm |
Power supply | 24VDC, 220VAC |
Working temperature | Fork body:-40~+220℃ |
Process pressure | <2.0MPa |
Process connection | Flange,thread (optional) |