Nail Shape Rfid Tags Waterproof For Tree Or Wood/White High Frequency Rfid Tags
RFID Nail tag is composed of plastic outer covering and robust RFID transponder inside, which could suit for extensive application even a harsh environment. Only need a narrow space, nail tag is widely applied in industrial and agricultural identification project.
A tiny cylindrical ferrite core assembled with a spring coil directly, as a RF antenna in Low Frequency, nail tag could get satisfied read range in direction of column, and its rust-resistant in wet ,matel and chemical environment.
Installation Method:
Driven into the surface after drilling is recommended drill size not less than ¢ 5 * 33mm, thwack with a rubber hammer. Suitable for installation in cement products, precast, plastic products, trees and other non-metallic items.
Description:
1. Chip: 1K,I CODE SLI
2. Frequency: 13.56MHZ
3. Protocol Standard: ISO 14443A
4. HF Read range:0-5cm (Related to the chip ,antenna and reader)
5. Read/Write Endurance: 100,000 times
6. Operating Temperature : -20°C~85°C
Items | Parameters |
Material | Special PVC/ABS |
Dimensions | 34*23*7mm |
Attachment | Inserted into wooden items using hammer |
Environmental Sealing | IP68 |
Protocols | ISO14443A,ISO15693, ISO11784/85 |
Operating Temp | -25℃ to 60℃ |
Frequency Range | 13.56MHz |
IC Type | MIFAIR, I Code SL2, EM4200 |
User Memory | 13.56MHz:1K bits or 4K bits |
125KHz: 64 bits or 512bits | |
Read Range | <10cm |
Application areas:
Suitable for a variety of non-metallic materials management, security patrol, military packaging, packaging and labeling, vehicle identification, park management, tree management, asset identification management system.