Casting Rolled Railway Fish Plates 38kg 30kg 24kg Specification
Introduction
The fish plate is a connecting fastener used for the connection between the track and the track.
Fish plate appearance quality: zmwm02
(1) The rail after rolling shall be straight and shall not have significant bending and torsion. For the local bending and torsion of the light and heavy rails and the amount of their correction, the inclination of the rail end faces shall not exceed the standard.
(2) The surface of the rail should be clean and smooth, and there must be no defects such as cracks, crusting or scratches; the end faces must not have shrinkage marks and interlayers. The extent of the defects and geometrical quantities allowed for the overall surface of the light and heavy rails shall not exceed the standard.
Fishplate material: forged steel
Specification: These fish plate can apply to Light Rail, Heavy Rail and Crane Rail. Also can produce accoring to customers drawing.
British Standard Fish Plate | ||
Type | Standard | Material |
BS75R | BS47-1 | EUROPEN GRADE 700 |
BS80A | ||
BS90A | ||
BS100A | ||
BS113A |
GB/TB Standard Fish Plate | ||
Type | Standard | Material |
43KG | TB/T 2345-2008 | B7 |
50KG | ||
60KG | ||
75KG |
British Standard Fish Plate | ||
Type | Standard | Material |
BS75R | BS47-1 | EUROPEN GRADE 700 |
BS80A | ||
BS90A | ||
BS100A | ||
BS113A |
JIS Standard Fish Plate | ||
Type | Standard | Material |
37A | JIS E 1102-2001 | SS 490 S20C |
50N | ||
CR73 | ||
CR100 | ||
BS113A |
AREMA 2007 Standard Fish Plate | ||
Type | Standard | Material |
T- Rail | AREMA 2007 | AREMA GRADE/STEEL GRADE55# |
100lb.ASCE | ||
115RE | ||
132RE | ||
136RE |
Crane Rail Standard Fish Plate | ||
Type | Standard | Material |
104lb.CR | TB/T 2345-2008 | B7 |
105lb.CR | ||
135lb.CR | ||
171lb.CR | ||
1751b.CR | ||
Standard length: 914.4mm drill hole or punching, four hole or six hole. |
Crane rail Accessories - Fish Plate for P rail / QU rail forging and casting rolled fish plate definition and uses rail joint bar
Crane rails are designed for carrying heavy loads and are used in a wide variety of applications. There are seven normal crane rail models called P18, P24, P38, P43, QU70, QU80, QU100 in China. Rail weight ranges from 18kg to 88kg per meter. You can find a weight and measure conversion table on to us if you need.
Each rail application is different and must be engineered to maximise efficiency and lifespan, therefore the selection of the correct rail is critical to achieving this end.
Type | C | B | A | D | Weight (kg/m) | Standard |
P18 | 40 | 80 | 90 | 10 | 18.06 | YB222-63 |
P24 | 51 | 92 | 107 | 10.9 | 24.46 | YB222-63 |
P22 | 50.8 | 93.66 | 93.66 | 10.72 | 22.3 | GB11264-89 |
P30 | 60.33 | 107.95 | 107.95 | 12.3 | 30.1 | GB11264-89 |
P38 | 68 | 114 | 134 | 13 | 38.72 | GB183-63 |
P43 | 70 | 114 | 140 | 14.5 | 44.65 | GB183-63 |
P50 | 70 | 132 | 152 | 15.5 | 51.51 | GB 183-63 |
QU70 | 70 | 120 | 120 | 28 | 52.8 | GB3426-82 |
QU80 | 80 | 130 | 130 | 32 | 63.69 | GB3426-82 |
QU100 | 100 | 150 | 150 | 38 | 88.96 | GB3426-82 |
QU120 | 120 | 170 | 170 | 44 | 118.1 | GB3426-82 |
Model | S (mm) | S1 (mm) | S2 (mm) | S3 (mm) | S4 (mm) | S5 (mm) | Rail Size |
FP-24 | 400 | 29 | 98 | 137 | 98 | - | P18/ P22/ P24 |
FP-30 | 490 | 36 | 128 | 127 | 128 | - | P30 |
FP-38 | 790 | 65 | 160 | 110 | 120 | - | P38/ P43 |
FP-80 | 500 | 52.5 | 121 | 138.5 | 120 | 43 | QU70/ QU80 |
Kingrail supply various railway products:
railcar spares: wheels, axles, bearings, shafts, bogie spares, forging and casting products
rail track materials: fisplates, steel rail and accessories, tie plates, clips, bolts and nuts, etc
Both small and big orders are welcome!