Railway Spring Washer Spring Steel Single Layer And Double Layers Lock Washers

A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID). Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied. Type Demension Weight (Kg/Mpcs) Spring wsaherFe6(UIC864-3) diam: 25 90 Spring washer AREA67 7/8 90.55 Spring washer AREA67 1 152.33 Spring washer AREA67 1-1/8 187.65 Plain pattern washer 7/8 70.46 Plain pattern washer 1 78.03 Plain pattern washer 1-1/8 85.32 Flat washer ULS6 47/23/4 41 Flat washer ULS6 50/25/4 42

Samples Show:

Single Layer And Double- Layers Spring Washer

SUYU specialize in produce rail fastening , spring washer and flat washer are widely used on the railway , spring washers are available in single or double types and various sizes. Below is some of our main products .

As a leading manufacturer of rail fastening in China , SUYU also can produce many other railway fasteners , such as track bolt . Sleeper screw . track spike .tie plate .rail clips ,elastic rail clip .SKL tension clamp .rail shoulder and so on .

Sticking to the “quality first” policy, SUYU pays great attention to quality control management. We have granted ISO9001-2000 certificates and have got the production license of China’s Railway Ministry on railway products. We have a full set of inspection instruments which makes sure all the products produced by us should be of high quality and up to customers’ requirements.