COVID-19 Saliva Collection Kit –Saliva with Funnel and Transport

Media manufactured in ISO certified facility

【FEATURES】

1. The kit includes 1 funnel and 2 collector tubes(3ml and 10ml both are available).
2. Use and application scope: Collection of human saliva specimen.
3. With medium or without the medium.
4. Excellent sealing design ensure leakproof.
5. Individual Packing or bulk packing

【PACKING】

30pc/box, 10box/CTN

Kit package: one collection funnel with tube+10ml tube+3ml medium +biohazard bag.

【INTENDED USE】

It is used to collect and store saliva samples from the mouth. The samples are

extracted for clinical in vitro diagnosis.

【MAIN COMPONMENTS】

【How to Collect Your Own COVID-19 Saliva Specimen

(with Funnel and Transport Media)】

This step-by-step guide shows you how to collect your own saliva sample with a funnel and

transport media.

Duration: 3 min

Instructions

Do NOT eat, drink, chew gum, smoke, or vape for at least 30 minutes before collecting saliva.

Wash hands and make sure you have everything you need before you begin. A saliva test kit

consists of an empty tube with blue liquid in the cap, a funnel, a clear bag to place the sample,

a COVID-19 test requisition form, and a label for the tube with your information. Be sure to

leave the small absorbent paper in the provided biohazard bag.

Label the tube with the date of collection, full name and date of birth or Health Card Number.

Failure to provide this information may result in rejection or testing delay.

Complete all required fields of the COVID-19 test requisition form.

Peel back the paper on the test kit and remove the cap containing the blue liquid and the

specimen tube with attached funnel. Stick the completed label on the tube. Place the cap upside

down in a clean, secure spot, it will be used to seal the sample.

To promote saliva production, rub the inside of your cheek with your tongue and allow saliva to

pool in your mouth, then begin carefully spitting into the funnel allowing saliva to run into the

tube until it reached the fill line (not including bubbles).

Once you have collected enough saliva, twist off the funnel top and place in the garbage.

Immediately put the cap containing the blue liquid back on the tube, twisting tightly until you

hear a click and the blue liquid mixes into the tube.

Shake tube for five seconds to mix saliva and liquid and do not reopen the tube or remove any liquid.

Place the tube in the provided biohazard bag and place the fully completed test requisition form

into the outer pocket of the bag. Close the bag.

Wash your hands and check with your school for where to drop off the test. The specimen should

be kept at room temperature and dropped off within two hours of collection.

How to Collect a Saliva Sample for a COVID 19 PCR Test

This step-by-step guide shows you how to use a saliva test kit to collect a saliva specimen for

a COVID-19 test.

Duration: 3 min

Instructions

Before collecting saliva:

Please read all of these instructions before beginning

Drink a cup of water 60 minutes before collecting saliva to ensure adequate hydration for

saliva flow.

Do NOT eat, drink, chew gum, smoke, or vape for at least 30 minutes before collecting saliva

Wash hands with soap and water or hand sanitizer

For specimen collection center personnel:

While wearing appropriate personal protective equipment (PPE), open the sealed bag and

remove the specimen container and funnel from the package.

Label the specimen container with the patient’s full name, date of collection, and one other

unique identifier such as date of birth or Health Card Number. Failure to provide this information

may result in rejection or testing delay.

【STORAGE CONDITIONS】

Store at temperature 5 - 25 ℃.

【SAPMLE REQUIREMENTS】

Applicable sample types: Saliva.

Storage and transportation of samples: After the sample is collected, it should be transported to the corresponding laboratory for testing within 48 hours, and the storage temperature is 2-8℃. If it cannot be transported to the laboratory within 48 hours, it should be stored at -20 ℃ or below and sent to the corresponding laboratory within one week. The sample should avoid repeated freezing and thawing.

【INSTRUCTIONS】

1	Clean your mouth 30 minutes before collecting the saliva sample, rotate the tongue in the mouth to enrich saliva.
2	Deliver saliva into the collection funnel, until the 2 mL line is as instructed on the tube.
3	Hold the saliva collection tube in an upright position, and use the other hand to unscrew the saliva preservation solution tube cap.
4	Keep the collection funnel upright, and pour the saliva preservation solution slowly into the collection tube.
5	Keep the collection tube upright, remove the collection funnel.
6	Screwcap onto the collection tube, and invert gently 5 times to mix the saliva and saliva preservation solution thoroughly. Finally, put it in a biohazard bag for easy transportation.

• Samplers should be sent for testing as soon as possible after sampling and immediately transported within 48 hours at 2-8 ℃. Long-term storage should be placed in low-temperature conditions below -20℃, -70℃ or store at freezing level -196℃.
• Sampling should be carried out in strict accordance with the sampling procedure so that the sampling location is accurate and the sampling strength is uniform and suitable. Otherwise, it will affect the quality of the sample.
• Do not use expired products and products with damaged packaging.

12 months

【INDEX OF SYMBOL】

【EXPORTER】

Magnus International Limited

F12, New City International Mansion A, 234 Huapao Ave.

Liuyang, Hunan Province 410300 China

Contact: Goodwellmedical@gmail.com

【AUTHORIZED REPRESENTATIVE】

Lotus NL B.V.

Koningin Julianaplein 10, 1e Verd, 2595AA, The Hague, Netherlands.

【FACTORY VIEW】

【FACTORY WORKSHOP】

【PRODUCTION】

【PRODUCT AND STANDARDS】

【CERTIFICATIONS】

【FAQ】

1. Q: How about your healthcare and medical product quality?

A: Quality is our top priority. We have a professional quality control team to ensure the

quality with a high standard and regulated with the pro certifications. The QC team is

responsible for quality checking in each process and inspects every batch of our production

and ships them only after QC approval.

2. Q: What is your order MOQ?

A: Please contact customer service, and the price is negotiable for a large quantity.

3. Q: How about your product packing for shipment or mailing?

A: We prepared a well neutral package for our products. We could also make OEM packages,

OEM/ODM Custom Package/Multi-packing package/Cartons with well protective wrapping.

4. Q: What level of your product price?

A: We are the factory and direct manufacturer and offer competitive prices. We also offer

volume pricing with more benefits depending on your order quantity level. Please let us know

your ordering volume while you make the inquiry to us to help you obtain better benefits.

5. Q: What're the price terms?

A: The price is based on the FOB of Hunan, China with an exchange rate of RMB6.40 for

USD$1.00. If the exchange rate floating sharply lower than 6.3 or higher than 6.5, we should

adjust the price with the real-time exchange rate.

6. Q: What're the payment terms?

A: We accept T/T wire transferring, PayPal, Western Union, etc. 50% down payment after

signing the contract and rest 50% before shipping confirmation.

7. Q: How could I get some samples?

A: We are able to deduct your samples expense once your orders are confirmed with us.

The shipping fee will be calculated with the sample volume that you demand.

8. Q: Could you accept OEM orders?

A: Yes, we could. We have professional designers who can design the logo or artwork and offer

best solution & styles for your OEM product choices.

9. Q: How long will the shipping or express take?

A: (1) For the international express such as DHL, UPS, FedEx, TNT, or EMS, etc., it usually

takes 5-7 working days to your location or destination.

(2) If shipping with containers, they will take about 30-60 days to process depending on

the various ports or door locations.

(3) We will arrange the delivery or shipping of your products within 1-3 days after full

payment has been confirmed. We may not ship your products out until your payments arrive

to our bank account successfully.

10. Q: How do you deliver the goods to us?

A: If the order of small volume package, we could deliver by courier such as DHL, UPS, FedEx,

TNT, EMS. For the large volume order, we could ship with bulk cargo containers by sea.

We will provide you with cost-saving recommendations for your product shipping.

11. Q: What is the warranty time.

A: One year for each product.

【SHIPPING】

We are the trusted healthcare and medical supplies from China.

Be free to contact us at any time!

You are very welcome to email us today at:

Goodwellmedical@gmail.com for the inquiry!

We are excited to build a reliable and long-term business with you

at our best!