Looking for COVID-19 Antigen Fast Test 5 boxes packing?​

Yes, we have!

【EXPERIMENT WORKFLOW】

Please read the instruction for use carefully before using this kit. All reagents should be incubated at room

temperature (10-30°C) for 30 minutes prior to use. The test should be carried out at room temperature and the

operation procedure is described below:

1. Open the sealed bag and remove the Detection Strip. Mark the sample ID on the test strip and lay the strip

flat on the table.

2. Specimen collection

1). Carefully insert the swab into the nostril of the patient, reaching the surface of posterior nasopharynx,

that presents the most secretion under visual inspection.

2). Swab over the surface of the posterior nasopharynx. Rotate the swab several times.

3). Withdraw the swab from the nasal cavity.

3. Sample preparation

1). Insert the sample diluent tube into the pipe rack, make sure that the tube is standing firm and reaches

the bottom of the pipe rack.

2). Open the purple cap of the sample diluent tube. Insert the swab into the diluent tube which contains

0.5 mL of the diluent buffer. Roll the swab at least 6 times while pressing the head against the bottom

and side of the diluent tube.

3). Leave the swab in the diluent tube for 1 minute.

4). Squeeze the tube several times with fingers from outside of the tube to immerse the swab. Remove

the swab,close the cap. The diluent solution will be used as test sample.

5). Open the small cap on the top of the sample dilution tube. Add 3-4 drops (~100 μL) of the sample

diluent buffer immediately to the sample well.

6). Allow the strip to develop for 10-15 minutes at room temperature. A visible band can be read by

naked eyes.

【EXPORTER】

Magnus Internationa Limited

F12, New City Internationa Mansion A, 234 Huapao Ave.

Liuyang, Hunan Province 410300 China

Contact: Goodwell@gmail.com