Product Name | Stackable all in one lithium ion battery cabinet 10kw 15kwh 20kwh 25kwh 30kwh residential solar power energy storage system |
Basic parameter | ||||||
Battery Type | LiFePO4 | |||||
Communication Connecter | RS485 | |||||
Protection Level | IP20 | |||||
Operating Temperature | -15°C-55°C | |||||
Cooling method | Intelligent air cooling | |||||
Built-in interface | RS485 | |||||
Installation Way | Stackable | |||||
Noise | <60dB | |||||
Statement | Up to 16 battery packs in parallel | |||||
Battery parameter | ||||||
Power | 5.12kwh | 10.24kwh | 15.36kwh | |||
Battery Voltage | 40-58.4V | |||||
Battery Rated Voltage | 51.2V | |||||
Battery Module Quantity | 1 | 2 | 3 | |||
All in One ESS Cabinet Dimention (excluding bottom wheel) | 620*438*475mm | 640*438*624mm | 640*438*791mm | |||
Max Charge/Discharge Current | 50A/100A | |||||
Inverter parameter | ||||||
Inverter output | 5kw | 8kw | 10kw | |||
Rated output power | 10000VA | 8000W | 10000W | |||
Rated output voltage | 230Vac(L/N/PE single-phase) | |||||
Load bearing motor capacity | 4HP | 5HP | 6HP | |||
Output waveform | Pure sine wave | |||||
Rated battery voltage | 48Vdc | |||||
Voltage range | 40~60Vdc | |||||
Protection grade | IP20, indoor use | |||||
Ambient temperature | -15°C-55°C | -10°C-55°C,>45°C Derating | ||||
Photovoltaic input | ||||||
Max Input Power | 4,400W | 11000W | ||||
Max input current | 50A | 22/22A | ||||
Max open circuit voltage | 145Vdc | 500Vdc | ||||
MPPT operating voltage range | 60~115Vdc | 125-425Vdc | ||||
MPPT paths | 1 | 2 | ||||
Mains/Generator input | ||||||
Max mains/generator charging current | 60A | 100A | 120A | |||
Rated frequency | 50Hz/60Hz | |||||
Bypass overload current | 40A | 63A |