12V 20Ah light weight Solar Light Batteries , Lithium Battery Pack 2 Years Warranty
Replace the traditional lead acid batteries
long lifespan & powerful & reliable
lighter & smaller and environment friendly
1. LED Light battery packs 12V 20Ah advantage
2. LED Light battery 12V 20A Specification
NO. | Items | Characteristics | Testing Methods | |
1 | Nominal Voltage | 12V | Follow | |
2 | Nominal Capacity | 20Ah | Follow | |
3 | Minimum Capacity | 19Ah | Follow< GB/T18287-2000 > | |
4 | Battery internal Impedance | Internal Impedance≤40mΩ
| Internal Impedance Testing Machine( HIOKI 3555,1kHz ) | |
5 | Shipment Voltage | 12.8-13.6V | Multi-meter | |
6 |
Dimension | Length | 184mm | Vernier caliper |
Wide | 74mm | |||
Height | 136mm | |||
gross weight | Approx:3.0kg | electronic scale | ||
7 | Working Temperature | Charge | 0~45℃,45~85%RH | Temperature & Humidity Instruments |
Discharge | -20~55℃,45~85%RH | |||
8 | Storage Temperature & Humidity Range | Short: above one month | -20~+55℃,45~85%RH | Temperature & Humidity Instruments |
Medium: above three months | 0~+45℃,45~85%RH | |||
Long:above one year | +5~+30℃,45~85%RH | |||
9 | Allowed maximum continuou charg current | 20A(1C) | Multi-meter | |
10 | Allowed maximum continuous discharge current | 40A(2C) | Multi-meter | |
11 | Allowed maximum reverse charge voltage | NO Allowed | / | |
12 | Allowed maximum charge voltage | 14.6±0.1V | Multi-meter | |
13 | Discharge cut-off voltage | 9±1V | Multi-meter |
3. LED Light battery 12V 20Ah safety test
@Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.
No. | Items | Standards | Testing Methods |
1 | Short-Circuit | The battery should be no remarkable breakage, distortion. And charge normally. | Use a resistor with less than 0.05Ω to make the battery short circuit for 1 hour. The appearance and characteristics are normal. |
2 | Over Discharge Protection Test | The battery should be no remarkable breakage, distortion. Appearance and charge are normal. | Discharge the battery at the rate of 2A with the load of 30Ω for 24h . Charging for 10sec with specified adapter , and check the voltage(≥8.0V) |
3 | Impact Test | The battery should be no explosion or catch fire | Place a full charged battery on a flat and put a stainless steel stick (Diamond 15.8mm) in the middle of the battery upright . Beat the steel stick with 9.1Kg |
5. Our service
Your inquiry will be warmly welcomed, looking forward to our long term cooperation.