12V200Ah Lithium RV Camper Battery , 150 A Discharge , with High Inrush Current Capability
This specification defines the performance of rechargeable LiFePO4 battery pack TB-BL12200F-S108A manufactured by SHENZHEN TOPBAND BATTERY CO.,LTD, describes the type, performance, technical characteristics, warning and caution of the battery pack. The battery pack support Bluetooth communication function. Through Android and IOS APP, can read the battery status and information. Especially due to the Android system’s openness, different smart phone manufacturer will have their own different Bluetooth hardware version and customized feature Android systems. So the APP may not work well on some smart phones(with Android system) due to compatible issue. It is necessary for the customer to confirm whether the phone is compatible for the APP.
2. Specification (@ battery initial temp 25°C)
|
Long time storage:
If the battery need be stored for a long time, the voltage should be 13.2V(50%SOC), and stored in the condition as storage proposal. It need at least one charge & discharge cycle every six months
3. Test Conditions
3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.
3.1.2 Unless otherwise specified, the tested product is required unused within two month after outgoing.
"Standard Charge" means at 25±2℃ charge to limit voltage with 0.33C constant current, then charge with constant voltage until current less than 0.02ItA.
" Quick Charge" means at 25±2℃ charge to limit voltage with 0.5 C constant current, then charge with constant voltage until current less than 0.02ItA.
"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with 0.33C current.
"Quick Discharge" means discharge to the cut-off voltage with 0.5C current.
4. Product Performance
NO. |
Items |
Criteria |
Testing method | |
4.1 |
Rated Capacity |
200Ah | Rest for 1 hour after fully charged, then discharge with 0.33C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 120 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity. | |
4.2 |
Minimum Capacity |
190Ah | ||
4.3 |
Internal resistance |
≤20mΩ | 50% battery SOC state frequency of 1 KHZ ac resistance tester | |
4.4 |
Cycle life (DOD100%) |
≥2000cycle | Discharge with the current of 0.33C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life. | |
4.5 |
Discharge Temperature Characteristics | -20℃ |
≥70% |
At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage and record charge capacity. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage. |
-0℃ | ≥80% | |||
25℃ | ≥100% | |||
55℃ | ≥95% | |||
4.6 |
Charge Retention ability | Residual capacity≥80% |
Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage. | |
Recovery capacity≥90% | ||||
4.7 | Communication Function |
Bluetooth | Though ,user can read the battery system information such as voltage, current, SOC, temperature…and so on. |
5. Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
NO. | Items | Content | Specification |
5.1 |
Over charge | Over-charge protection for each cell | 3.80±0.04V |
Over-charge release for each cell | 3.60±0.04V | ||
Over-charge release method | Under the release voltage | ||
5.2 |
Over discharge | Over-discharge protection for each cell | 2.5±0.04V |
Over-discharge release for each cell | 2.8±0.04V | ||
Over-discharge release method | Charge to recovery | ||
5.3 |
Over current | Discharge over current protection Protection delay time | 210A~250A/6s~10s 250A~520A/0.5s~2s |
Over current release method | Delay about 8S after recovery | ||
5.4 | Short circuit | Do not short-circuit the electrodes | Designed For 550A~1000A /1ms |
5.5 |
Battery temperature |
Charge over temperature | Protection @65±5℃ |
Release @50±5℃ | |||
Discharge over temperature | Protection @65±5℃ | ||
Release @50±5℃ | |||
MOSFET over temperature protection | Protection @103±10℃ | ||
Release @75±10℃ |
6. Dimensional Drawing
7. Transportation
Warning & Tips
Please read and follow the specification and caution remarks on battery surface before use the battery. Improper use may cause heat, fire, rupture, damage or capacity deterioration of the battery. SHENZHEN TOPBAND BATTERY CO.,LTD. Describes is not responsible for any accidents caused by the usage without following our specification.
² The battery must be far away from heat source, high voltage, and avoid to be exposed in sunshine
for long time.
² Never throw the battery into water.
² Do not put the battery in a charger or equipment with wrong terminals connected.
² Never connect the positive and negative of battery with metal.
² Avoid excessive physical shock or vibration. don't hit, fall, stamp on the battery
² Without the permission of the manufacturer and guidance, forbidden to remove or to assemble the battery
² Do not use the battery mixed with other different manufacturer, type, or model batteries.
² Keep the battery against high temperature. Otherwise it will cause battery heat, get into fire or lose some function and reduce the life.
² When battery run out of power, please charge your battery timely (≤15day).
² Please use the matched or suggested charger for this battery.
² If battery emit peculiar smell, heating, distortion or appear any abnormity during working or storage, please stop using and take it out from device.
² If the battery leaks and get into the eyes or skin, do not wipe, instead, rinse it with clean water and see doctor immediately.
² Please far away from children or pets.
² Do not put disuse battery into a fire or water.
² Series connection of this battery pack is prohibited
² Parallel connection of this battery pack is allowed under condition that voltage difference ≤0.2V,parallel numbers ≤4 groups, and operated by professionals.