High Application Solvent Oil Based High Gloss Acrylic 2k Pure black Car Paint Auto Refinish Paint
Pot Life | 24 Hours,25ºC | ||
No.of Coats | 2-3 coats | ||
Flash-off Time | 2-3 mins at 25ºC | ||
Film Thickness | 10~20 micron | ||
Spraying Tool | Gravity feed: 1.2~1.5mm | ||
Suction feed: 1.2~1.7mm | |||
spraying pressure: 3-5kg/square centimetre | |||
Drying Time | At 25 ºC, after 15 minutes, spray varnish within 1 hours | ||
Using Substrates | The surface of old paint or primer after sanding with the P1000# sandpaper or removing the oil | ||
Others | After spraying 2K metal paint, should spray varnish within 1 hour as much as possible,to ensure the accuracy and repeatability of color formula, stir equably before application |
Type | 2K car paints and refinishes | |||
Substrates | Well-Sanded,Completely dried and good existing finishes as below: A. Original paint B.Old paint firm C.1K or 2K primer | |||
Mixing Ratio | 2K Solid Colors(2) | Hardener(1) | Thinner(0.2-0.4) | |
<15°C | 2K Solid Colors | 120 Fast Hardener | 602 Fast Thinner | |
15-30°C | 2K Solid Colors | 120 Standard Hardener | 602 Standard Thinner | |
>30°C | 2K Solid Colors | 120 Slow Hardener | 602 Slow Thinner | |
Spray Viscosity | 16-19s to drop off, in 4# viscosity cup at 25°C | |||
Re- Treatment | There are particles or runs after spray, sand affected area with P2000 sand paper after thorough dring, then polish to solve it. | |||
Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm² Gravity Feed: 1.4-1.6mm 3-5kg/cm² | |||
Spray Technology | Coats & Thickness: 2-3 coats, total 35-50um Flash-Off Time: At 25°C ,5-10 minutes between two coats Air-Drying Time: Allow 10-15 minutes air drying before force drying |