Cooking Machine Rendering Machine Rendering Plant​

See machine When cleaning the exterior of the appliance label (nameplate), do not use a high-pressure cleaner to clean the electrical parts.

Never open the inspection door and the filling/draining door during operation.

If it is a batch processing machine: When conveying materials to the machine, make sure Ensure that the drain door is closed.

Only qualified personnel who have received clear instructions can operate the equipment. Ensure that there is no foreign matter (metal, etc.) in the barrel during operation.

Before supplying steam, it is necessary to check whether all flange connections are properly installed and whether the packing and bolts/nuts are tight.

All steamed The steam pipe must be flushed and cleaned before supplying steam to the steam system.

The operating pressure and temperature of the equipment are described in Chapter 1. Do not install the machine above the production line with higher pressure/temperature Device.

Jiangsu SunRise is not responsible for any damage and personal injury caused by exceeding the design value.

The cooking machine must not be damaged, bumped, or the like, as this will damage the equipment or affect its performance.

Before connecting to electricity:-Check whether the voltage and frequency are consistent with the parameters on the motor nameplate.

Only qualified personnel who have received clear instructions can operate the equipment. Ensure that there is no foreign matter (metal, etc.) in the barrel during operation.

Before supplying steam, it is necessary to check whether all flange connections are properly installed and whether the packing and bolts/nuts are tight.

All steamed The steam pipe must be flushed and cleaned before supplying steam to the steam system.

The operating pressure and temperature of the equipment are described in Chapter 1. Do not install the machine above the production line with higher pressure/temperature Device.

Jiangsu SunRise is not responsible for any damage and personal injury caused by exceeding the design value.

See machine When cleaning the exterior of the appliance label (nameplate), do not use a high-pressure cleaner to clean the electrical parts.

Never open the inspection door and the filling/draining door during operation.

If it is a batch processing machine: When conveying materials to the machine, make sure Ensure that the drain door is closed.