Diameter Is 1000mm Stainless Steel Shell Tube Condenser
The shell-and-tube condenser produced by Jiangsu Sunrise is used to condense the processing steam excluding the cooking equipment and the drying equipment.
In order to evenly distribute the cooling water to each steel pipe, a water distribution tank is installed on the top of the condenser, and the water is distributed from the water tank to each steel pipe through a distributor or perforated sieve plate. There are many structural types of water distributors, the most used one is the diversion nozzle (Figure 1 b). A diversion nozzle is installed at the top of each steel pipe. The cooling water flows into the pipe through three chutes and flows downwards along the inner wall of the pipe in a spiral shape, so that a water film is formed on the inner wall of the pipe to make the cooling water sufficient Utilization to improve the cooling effect of the condenser and save water. [1] Vertical shell and tube condenser tubes generally use seamless steel tubes. This kind of condenser can be installed in the open air to save the area of the machine room; it can also be installed under the cooling water tower to simplify the cooling water system. It does not require high cooling water quality and can clean the water pipe during operation. The heat transfer coefficient of the vertical tube condenser is smaller than that of the horizontal condenser, the cooling water consumption is large, the volume is large, and it is relatively heavy; the water flow speed in the condenser tube is low, and the scale is easy to form, and the lime sand is easy to fall in, and it needs frequent cleaning.
type | Horizontal Tube Condenser |
Heat Exchange Area | 90㎡ |
Material | S30408(heat exchange tube and end plate) / Q345R(body) |
Cylinder diameter | 1000mm |
Cylinder length | 3690mm |
Intake air temperature | 100℃;Outlet temperature:40℃ Shipping weight:2400kg |