CZPG-1500-7 Be Used For Dring The Material Disc Dryer

With the saturated steam, hot water or heat conducting oil as heating medium, the vacuum rake dryer is an energy-saving and indirectheating drying equipment, which can be intermittently operated to dry the materials in vacuum condition. It can be mainly used for thedrying of slurry, paste, granular, powder, fiber, easily oxidized, heat sensitive materials.

Reasonable selection of dryers can save investment, reduce operating costs, ensure product quality, and obtain maximum economic benefits. The ideal selection of the dryer must be based on the user's own conditions and material factors, with some emphasis to find the most suitable model for their materials.

The following are the general principles of drying equipment selection:

1. It is best to make a drying experiment of the material before selecting the model. A thorough understanding of the drying device used for similar materials is often helpful for proper model selection. applicability.

2. The drying device with simple structure, adequate supply of spare parts, high reliability and long life is preferred.

3. The drying equipment must first be applicable to specific materials and meet the basic requirements of material drying, including the ability to handle materials well, and meet the basic requirements of processing volume, dehydration volume, product quality, etc.

4. Low operating cost. Equipment depreciation, energy consumption, labor costs, maintenance costs, spare parts costs and other operating costs should be as low as possible.

5. Low energy consumption. Different drying methods have different energy consumption indicators. The thermal efficiency of general conductive drying can theoretically reach 100%, and the thermal efficiency of convection drying can only be about 70%.

6. Meet the requirements of environmental protection, good working conditions and high safety.

7. Save investment. The drying device that completes the same function sometimes differs greatly in cost, so you should choose the lower one.

8. High drying rate. In terms of drying rate only, the material is highly dispersed in hot air during convection drying, the critical moisture content is low, and the drying speed is fast, and the same is convective drying. Different drying methods have different critical moisture content, so the drying rate is also different.