For Disc Dryer,Automatic Control Valve Set, GZFZ1850
The dryer cylinder section for toroidal welding, longitudinal along the entire circumference of not more than two weld article number, and shell welds shall be full, the minimum is not lower than the parent metal surface, the top should not be higher than 3 mm, feed plate weld should be smooth.Weld edge bite depth should not be greater than 0.5 mm, continuous length should not be greater than 100 mm, should not exceed the total length of each weld bite edge which 10% of the weld length.
With the saturated steam, hot water or heat conducting oil as heating medium, the vacuum rake dryer is an energy-saving and indirectheating drying equipment, which can be intermittently operated to dry the materials in vacuum condition. It can be mainly used for thedrying of slurry, paste, granular, powder, fiber, easily oxidized, heat sensitive materials.
Include:
1,Steam control valve DN125,Brand:SpiraxSarco;
2,Pressure transmitter and installation accessories,Brand:VEGA;
3,Temperature sensor and installation accessories,Brand:Brady;
4,Manual stop valve DN125,Brand:Zhongshan Kingdom;
5,Needle valve,field instrument,etc
Steam control valve DN125 | Brand:SpiraxSarco |
Pressure transmitter and installation accessories | Brand:VEGA |
Temperature sensor and installation accessories | Brand:Brady |
Manual stop valve DN125 | Brand:Zhongshan Kingdom |
Needle valve | field instrument,etc |