Drying The Material The Heated Area Is 215m³ Disc Dryer

1,With the saturated steam, hot water or heat conducting oil as heating medium, the vacuum rake dryer is an energy-saving and indirectheating drying equipment, which can be intermittently operated to dry the materials in vacuum condition.

2,It can be mainly used for thedrying of slurry, paste, granular, powder, fiber, easily oxidized, heat sensitive materials.

Operation method Open the door, rotate the dehydrated material evenly in the drum, and then close the door and lock it. According to the type of material, select the appropriate time and adjust the timing device to the required time. Press the start button to start the fan. According to user needs, the rotating drum can choose one-way rotation and two-way rotation. As long as the computer board switch is turned one-way or two-way, the machine will perform one-way or two-way operation according to the requirements. (Forward rotation for 25 seconds, stop for 5 seconds, and for reverse rotation for 25 seconds) Always observe the turnover of the internal fabric from the observation window. If an unexpected situation is found, the power supply should be cut off in time to check for malfunctions. When the machine runs to the specified time, the machine will automatically stop running. At this time, the operator must open the door to check the drying of the internal fabric. If the effect is not achieved, the time can be appropriately extended. The main feature adopts automatic control device, only need to adjust the time through the control panel to automatically complete the entire drying process. The rotating drum is made of high-quality stainless steel, the drum body is beautiful, smooth, and durable. Large processing capacity, low fuel consumption and low drying cost. It adopts triangular belt drive, stable operation, low noise, safe and reliable.