Model Is GFLQ1609 Shipping Weight Is 9500kg Meal Cooler

Continuous Meal Cooler

The sturdy, no-fills cooler enables you to use ambient air to cool a broad range of meal products after they have passed through a dryer. Cooling helps make the processed cake more brittle, so it’s easier to mill.

Importantly, such cooling also enables you to make sure temperature are kept below 50℃ to prevent self-ignition. The cooler is basically a long drum equipped with an agitator mounted in roller bearing on the end plates. This moves the hot meal (usually 90-110℃) through the cooler, while a counterflow of cooler air is drawn through by a centrifuge fan. This cooler air can either be ambient air or air from suitable processes elsewhere in your plant, usually at approx 20-30℃ above ambient temperature.

The cold feather meal machine produced by Jiangsu Sunrise is used to cool the dried meat and bone meal.

Unit characteristics Air-cooled chillers can be used in small systems, and most of the large units are water-cooled. The initial investment of water cooling is a little less than that of air cooling in terms of the main engine. But with the addition of cooling towers and computer roomselectronic water treatment equipment, there is not much to go! Besides, in terms of long-term operation, the cooling of water-cooled units The efficiency will be relatively lower, and the air cooling will not. The air-cooled chiller adopts the air cooling method, eliminating the need for cooling towers, cooling water pumps and piping systems that are essential for cooling water systems, avoiding condenser fouling and water pipe blockage in areas with poor water quality, and also saving water resources. Among the cold water air-conditioning equipment products, the most economical and simple type of maintenance and repair. Air-cooled chillers have a slightly higher one-time investment than water-cooled chillers, but the annual operating cost is lower than that of water-cooled chillers. The construction cost of the computer room is the least among various air-conditioning cold and heat source systems, and the maintenance cost is about water-cooled. Or half the cost of the boiler. The noise and volume of air-cooled chillers are greater than that of water-cooled chillers, so they can only be installed outdoors. Most water-cooled units are installed in the basement.