MCTRL4K LED Display Controller Specifications

Company Profile

We are HK Brilliance Tech Co., LTD. Our headquater is located on HK, China; and our factory is located on Shenzhen and Guangzhou, China. We have over 10 years manufacturing experience. We provide wide option of model of this type of product and we support customization for products and brand and logo.

Our products enjoy quick sale all over the world. We have more than 3 steps and procedure for quality check and quality assurance system. Each of products will ensure over 48h final performacne testing. With good quality, client always give good repute for our products.

Change History

. A variety of input connectors

- 1x DP 1.2

- 1x HDMI 2.0

- 2x DL-DVI

. 16 Neutrik Gigabit Ethernet ports and 4 optical ports

For DP/HDMI input, the maximum loading capacity is 8,800,000 pixels.

For DVI input, the maximum loading capacity is 8,300,000 pixels.

The maximum output height or width of a single MCTRL4K is 7680 pixels.

. High bit-depth inputs: 8bit/10bit/12bit

. HDR function

HDR10 and HLG are supported.

The MCTRL4K can work with the receiving cards

that support HDR to greatly enhance the image

quality of the display, presenting more vivid and

detailed images.

. 3D

The MCTRL4K can work with the 3D emitter

EMT200 and 3D glasses, allowing you to

experience 3D display effects.

. Individual gamma adjustmen

For 10-bit or 12-bit inputs, this function can

individually adjust the red gamma, green gamma and blue gamma to effectively control image non- uniformity in low grayscale conditions and white

balance offset, allowing for a more realistic image.

. RGB limited to RGB full

This function automatically converts the color

range of the input source from RGB limited to RGB full so as to display natural black in low grayscale conditions.

. Low latency

When low latency and input source sync are

enabled, and cabinets are connected vertically, the delay between the input source and receiving card can be reduced to one frame.

. Inputs with decimal frame rates

Table 1-1 Limitations on functions

Appearance

Front Panel

Table 1-2 Buttons and connectors

Rear Panel

Notes:

When the input source is HDMI or DP, the 144 Hz forced resolution input from the front end device can be parsed. In this situation, the loading capacity is reduced by half.

This product can only be placed horizontally. Do not mount vertically or upside-down.

Dimensions

Tolerance: ±0.3 Unit: mm

Specifications

Video Source Featur

Notes and Cautions

Notes for Battery

. The battery is not intended to be replaced.

. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.

. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.

. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference whenthe equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Others

This is Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

This product can only be placed horizontally. Do not mount vertically or upside-down.

Certificate

​​

Payment & Packing Transport

1.Transfer deposit when confirm order, and pay for balance when goods is ready.

2.Accept EXW, FOB, CIF, etc based on your request.