High Hardness Water Based Silicone Resin For Ceramic Coatings And Decorative Topcoat
Introduction
WL-0165 is a water-diluted carbosilane resin, it can be infinitely diluted with deionized water, and can be directly involved in grinding. The coating film has excellent hardness and high gloss. It can be used for ceramic coatings and high decorative topcoats.
Specification
Appearance | Transparent liquid |
Solid Content(%) | 45±2% |
Solvent | Water |
Ph Value | 6-10 |
Viscosity (Gardner, at 25℃ ) | Z3-Z6 |
Water solubility | Infinity |
Characters
Excellent water resistance (boiled at 100 degrees for 12 hours, the paint film does not fall off and does not blister.)
Excellent hardness (6-7H)
Excellent high temperature resistance above (500 degrees)
Excellent adhesion (tested after boiling at 100 degrees for 1 hour, passed adhesion cross-cut test)
Excellent flexibility, high gloss (the gloss of varnish > 95, 60°)
Good resistance to salt spray over 2000 hours
Application
Used for high temperature-resistant coatings such as ceramic coatings, cooking utensil coatings, firewood stoves, ceramic repair coatings, varnishes for various non-ferrous metal surfaces, or other coatings that require high chemical resistance, high hardness, high temperature resistance, and high corrosion resistance.
Storage
Storage in the place where is dry and installed with ventilation equipment, not in wet place.
Its shelf life is 2 years.
Special Tips
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.