AC220V-4kW Rack Mounted Load Bank With Frequency 50HZ And Best Sales
Introduction
(1) This unit specially designed for data center, it’s safe, reliable, small volume and can simulate the on-site server load.
(2) Constant power. This unit is self-developed electric power load simulation equipment.
(3) The diagram in the agreement is only for reference, specific please in kind prevail.
Application
AC220V-4kW Rack Mounted Load Bank
When you build a data center, any unexpected glitch during commissioning can cause serious project delays, wasted productivity, and significant budget overruns. So integrating rack mounted load banks into the design phase can help our data center clients keep projects on budget and on time.
Technical specification
System Parameter | |
Rating voltage/frequency | Single phase 220VAC/50Hz |
Max Load Power | Resisitive Power: 4kW(180v-260v),Constant power |
Load Resolution | Resistive Load: 2 steps. A circuit 2kW; B circuit 2kW |
Power Factor | 1 |
Load Tolerance | +(0-10%) |
Insulation Grade | Grade F |
Way of Working | Continuous Working |
Cooling | Forced air cooling, intake air in front and exhaust cooling in back |
Case Color | Black |
Case Dimension | About 447mm*447mm*178mm(L×W×H) |
Weight | About 15kgs |
Working Environment Parameter | |
Ambient Temperature | -10℃~+40℃ |
Relative Humidity | ≤95% |
Altitude | ≤2500 meters |
Atmospheric Pressure | 86~106kPa |
Brands of Main Components | |
Gear Switch | ABB |
(1) Load Test: User can load any power within rated power, and test the output capacity of under test power supply.
(2) Control Mode: The laod bank is with 2 gear switches, can control loading/unloading by 2 ABB air switches.
(3) Fan Power Supply: Fan is installed near the air outlet, and powered on A loop socket. Please give priority to the use A loop when using this load bank, the fan start after A loop is connected to power supply, then can load/unload through 2 gear air switches combination.
(4) Temperature Protection: There will be sound and light alarm when the load bank temperature exceeds the safety threshold value.
(5) Load bank Cable: The internal cable adopts multi core flame retardant flexible cord, and with glass fiber casing protection
The load bank is with 2 gear switches, can load/unload through 2 gear air switches combination, Max power is 4kW. Please connect A loop switch at first when operating, and must keep the A switch in the open state. If overheat alarm, please turn off the power switch and then check the equipment problem.