Testing on Generator Sets 10.5V 2000kw Dummy Generator Load Bank
Product Description
According to the special requirements of users on site, in the agreement the technical standards of AC10.5V-2000kw Intelligent Load Bank (hereinafter referred to as "system") and its accessories are proposed including their function, performance, usage, structure, installation and test to provide users with a high efficient and reliable choice, in order to meet the need for generator load test.
Technical Parameter
Rating Voltage/Frequency | 10.5KV /50Hz |
Rated Load Power | Resistive load: 2000kW |
Installed Capacity | Resistive load: 2000kW |
Load Step | Resistive load: 6 steps, 100kw,200kw,200kw, 500kw,500kw,500kw min step: 100kW |
PF(Power Factor) | 1 |
Load Tolerance (each step) | ±5% |
Load Tolerance(overall) | ±3% |
Display Precision | 0.5 class |
Control Power | 3 phase 4 wire 380V/50Hz |
Wire Connection | Load power supply input——Copper bar (star coupling) |
Insulation | F |
Max Protection Grade | IP55 |
Duty Cycle | Continuous |
Cooling | Forced air cooling,Horizontal inlet air,Vertical cooling |
Aeration | About 160,000 cubic meters per hour |
Casing Structure | Container, with a ladder, air inlet and outlet with mesh enclosure and protection door |
Transportation | Hoisting, there are lifting lug in top of casing |
Casing Color | Grey(RAL7035)or as per customer’s requirement |
Dimension | About 6058 mm×2438mm×2591mm(length*width*height) |
Weight | About 6000kg |
Workplace | Outdoor |
Ambient Temperature | -10℃~+50℃ |
Relative Humidity | ≤95% |
Product Advantages
1. The unit is designed in mobile for easy use during generator load testing, electrical and marine load testing.
2. digital meter displays the line voltage, line ampere, frequcy, power factor(optional) and
power measurements.
3. Digital metering
4. Large load capacity
5. Supporting whole year operation
Application
Manufacturers of standby power generators commonly use load banks to test and tune newly assembled units. When the generator has been set up in a test cell within the factory, a test engineer uses the load bank to apply a discrete, selectable electrical load to the generator and measure the response stability and endurance. During this process, the test engineer calibrates and adjusts the generator performance to ensure it meets the intended product specifications and tolerances.