Retractable Arena Stage Seating with VIP Programme for Indoor Stadium

Quick Detail

Description

Burgeon arena stage seating offers comfortable, generous seat spaces ergonomically contoured for spectator comfort. Spectator retractable arena stage seating solution includes recessed unit, integral dolly, freestanding unit, travelling unit etc. The seating platform type can be customized according to your project.

Plarform Type

1) Freestanding Unit: For some buildings, there are permanent rear large columns or weak loading rear wall, the freestanding unit is the ideal solution. Freestanding Units are outfitted with end rails and rear rails for safety reason. The rear panels or rear curtains are available upon request.

2) Travelling Unit: It is a hybrid of recessed and portable units. Travelling units use integral power to drive the entire bank from one setup position to another. Set-up time is greatly reduced compared to individual portable sections.

3) Portable Unit: Smaller units can be moved around within the space using a pair of lifting dollies or for ultimate versatility our integrated 360 swivel dollies allow your facility staff to move the units in any direction with a minimum of effort.

Operation Way

1) Manual Operation

Operating Handles: Provide and install manual operating handles constructed of 19mm OD steel tubing. Handles to engage pull-bar installed at the first tier.

2) Power Operation

A.Integrated Power: Furnish and install an integral automatic electro-mechanical powered frame propulsion system, to open and close telescopic seating.

B.Motion Monitor: Provide flashing light with self-contained warning horn mounted to the telescopic seating for audio and visual warning during integral power operation.

C.Electrical: Provide all wiring within seating bank including remote control device.

D.Electrical Switchboard and Enclosure: Provide a complete switchboard and enclosure with each seating bank.

Accessories

1. Seat Numbers: Provide each plastic seat module oval etched plate. Easy to read black numerals will be on the plate fitted in a vandal resistant recess.

2. Row Letters: Provide at each row end of plastic seat a 50mm x 50mm oval etched plate with black numerals.

3.Deco-Plywood: Shall be a high-density laminated overlay panel fabricated out of 18mm Plywood, 1mm Laminated sheeting (factory Adhered).