EN12727 Tiered Theater Upholstered Seating Telescopic Tribunes

Telescopic Tribune/ Riser Mounted Red Fabric Upholstered Seat with Retractable Mechanism

Details of Tiered Theater Upholstered Seating

Burgeon Primy tiered theater upholstered seating consist of rows of tiered seating on platforms that retract and extend. When the seating units extend, it can seat people. When the seating unit close, the space taken by the extended unit can be available for other functions, allowing you to easily get the most out of your facilities. The chair system adopts beam-mounted design, consisting of chairs independently mounted and armrests independently mounted to transverse beam. Top support arms shall be designed to capture and secure the beam in place.

Features of Tiered Theater Upholstered Seating

• Ergonomically designed for the superior comfort.
• Strength and durability tested.
• Slim profile for wide safe walkways.
• Enclosed spring tip mechanism for safety and silent action.
• Fabric upholstery or leather upholstery is available.
• Polymer backrest or timber backrest is available.
• Fixed Primy chair or Primy chair with retractable mechanism is available.
• Comply with EN12727 loading test.
• Fire resistance complies with BS 5852.

Parameters of Tiered Theater Upholstered Seating

Application of Tiered Theater Upholstered Seating

School Hall

School Theatres

Auditorium

Conference Venues

Arts Venues

Studio

Accessories of Tiered Theater Upholstered Seating

1. Front Panel: Provide elevated seating equipment with full width front closure panels are required. Panels shall extend vertically from underside of front row to within 38mm or floor.
2. End Panel: Provide closure end panels for stack position at each exposed bank ends. End panels shall be constructed of plywood or melamine.

3. Rear Panel: Provide required seating units with full width rear closure panels.

4. Front Rail: Can be provided 800mm high above deck (for better sightline), steel rails with tubular supports and intermediate members. Standard Front rails if required shall be 1000mm. Location detailed on drawings.
5. Self Storing End Rails: Provide steel self-storing 1100mm high above seat, end rail with tubular supports and intermediate members designed with 87mm sphere passage requirements.
6. Seat Number: Provide each plastic seat module oval etched plate. Easy to read black numerals will be on the plate fitted in a vandal resistant recess
7. Row Letters: Provide at each row end of plastic seat a 50mm x 50mm oval etched plate with black numerals.