Taconic Microwave PCB Made on TLF-35 30mil 0.762mm with OSP for Size Effective Antenna

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

TLF-35A is another type of low cost RF material. It's the best choice for low cost, high volume commercial microwave and radio frequency applications. TLF-35A has excellent peel strength for 1/2 ounce and 1 ounce copper (even in comparison to standard epoxy materials), a critical aspect whenever rework is required.

The ultra low moisture absorption rate and low dissipation factor of TLF-35A minimizes phase shift with frequency. TLF-35A is dimensionally stable due to the use of woven fabrics in its design. TLF-35A base materials exhibit flammability of V-0, and are tested in accordance with IPC-TM-650.

Data Sheeto of Taconic TLF-35

TFL-35A has low dielectric constant at 3.5 +/-0.05, low dissipation factor at 0.002.

Benefits of TLF-35 PCB:

1. TLF-35 PCBs are a cost-effective option for many applications.
2. These boards have excellent peel strength, ensuring their reliability over time.
3. With an exceptionally low dissipation factor (DF), TLF-35 PCBs can provide reliable signal integrity at high frequencies.
4. TLF-35 PCBs have low moisture absorption, which can help to prevent damage from environmental factors.
5. These boards have very high thermal reliability, making them an ideal choice for applications that require high-temperature operation.

Applications of TLF-35 PCB:

• TLF-35 PCBs are commonly used in repeater applications, where they can provide reliable signal amplification and transmission.
• These boards are also well-suited for use in passive components, such as filters and attenuators.
• TLF-35 PCBs are used in medical scanners, where their high thermal reliability and low moisture absorption make them an ideal choice for use in a clinical setting.

PCB Specifications