Single Band Wide Band Repeater GSM WCDMA LTE APP Control 33dBm power 85dB gain
Description
Consumer booster is to support any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area up to 100~5000 square meters with proper engineering.
Lenolink provides a series of products to support different application and customize your requirement. And the products can support single, dual and triple systems with one housing.
The power level varies from 10dBm to 43dBm which can satisfy the coverage area from 100 to 10000 sqm. Lenolink boosters are widely used in parking lots, hotel, VIP room, basement and private house.
Design Advantage
1. Support LTE in one housing.
2. The consumer booster is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, basement or building, in the quickest time possible.
3. Built in APP to manage the gain and other setting.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.
New features
1. Integrates 2 ~8 Wireless Bands
2. More than 50~100 dB Input Isolation
3. High Average Power,Minimal Insertion Loss
4. Superior Intermodulation Properties Prevent
5. Brackets for Mast and Wall mounting
6. Multiple IP Degree Conditions
7. N , DIN 4.3-10Connectors, Custom Designs Available
Electrical specification | Uplink | Downlink | |||
Frequency Range | LTE | Customized | Customized | ||
Max .Gain | ≥ 55dB | ≥ 60dB | |||
≥ 65dB | ≥ 65dB | ||||
≥ 65dB | ≥ 70dB | ||||
≥ 70dB | ≥ 75dB | ||||
≥ 75dB | ≥ 75dB | ||||
≥ 75dB | ≥ 85dB | ||||
Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
≥ 12dBm | ≥ 15dBm | ||||
≥ 15dBm | ≥ 20dBm | ||||
≥ 15dBm | ≥ 23dBm | ||||
≥ 20dBm | ≥ 27dBm | ||||
≥ 20dBm | ≥ 33dBm | ||||
Band width (-3dB) | Wide Band | ||||
MGC | ≥ 31dB / 1dB step | ||||
ALC | ≥ 15dB, auto shut off after 15dB | ||||
Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
Noise Figure | ≤6dB | ||||
VSWR | ≤1.8 | ||||
Group Delay | ≤0.5μs | ||||
Frequency Stability | ≦ 0.01ppm | ||||
Spurious Emission & Output inter-modulation |
GSM Meet ETSI TS 151 026 | ||||
WCDMA Meet 3GPP TS 25.143 | |||||
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
Modulation Accuracy | ≦ 12.5% | ||||
PCDE | ≦ -35dB@Spreading Factor 256 | ||||
Impedance | 50 ohm | ||||
Operating Temperature | -25ºC~+55ºC | ||||
Environment Conditions | IP40 | ||||
Power Supply | Input AC90~264V |