High Power LTE digital ICS repeater 43dBm output power high isolation
Description
Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 33dBm to 43dBm.
Digital ICS repeater can support any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area from 5000 to 10000 sqm with proper engineering. The single band repeater support one systems in one housing, for example, cdma, gsm, wcmda or lte.
Specification:
Description | Uplink | Downlink | |
Frequency Range (MHz) | 2500-2570 | 2620-2690 | |
Nos. of Channel & (Channel BW) | 4(5,10,15,20MHz) | 4(5,10,15,20MHz) | |
Max Gain | 90 dB | ||
Gain Flatness | ≤ ±1.5dB(p-p) | ||
ALC Range | ≥15dB | ||
Gain Control Range(MGC) | ≥40dB (Gain 50dB - 90dB in 1 dB steps ) | ||
Gain Control Accuracy | 1~20dB@±1dB | ||
>20dB@±1.5dB | |||
Total RF Input Power (no damage) | ≤+10dBm | ≤+10dBm | |
Output Power | UpLink: ≥20dBm | DownLink: ≥43dBm | |
Output Power Accuracy over all conditions(-10degC to +55degC ) | <=+/-3dB | ||
PIM & Spurious (Meet 3GPP TS 25.106) | Equal or better than -30dBm | ||
Noise Figure at maximum gain, 25deg C (typical) | ≤3.5dB | ≤3.5dB | |
Group Delay | ≤ 4.5µsec | ≤ 4.5µsec | |
Interference Cancellation Range (dB) | ≥30dB | ||
Return Loss | 18dB | 18dB | |
Impedance | 50Ω | 50Ω | |
Power Supply | Input 110 V - 260 V AC , 50 HZ | ||
Power Consumption (Max) | 200W | ||
Cooling | Heatsink convection cooling | ||
Operating Temperature | -25~+55degC | ||
RF Connector | DIN/4.3-10 | DIN/4.3-10 | |
Water Proof | IP 65 | ||
MTBF | ≥100,000 hours |
Design Advantage
Our factory: