GSM Mobile Signal Booster 20dBm power 70dB Gain 1000 Coverage including accessories
Description
Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 20dBm, gain is 70dB, it can provide coverage from 100sqm to 1000sqm.
GSM Repeater supports GSM900HMz or GSM1800MHz to help end users to improve mobile signals for better signal coverage.
Specification:
Electrical specification | Uplink | Downlink | |||
Frequency Range | GSM900 | 880 ~ 915 MHz | 925 ~ 960 MHz | ||
DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |||
Max .Gain | ≥ 65dB | ≥ 70dB | |||
Max .Output Power | ≥ 15dBm | ≥ 20dBm | |||
Band width (-3dB) | Wide Band | ||||
MGC | ≥ 31dB / 1dB step | ||||
ALC | ≥ 15dB, auto shut off after 15dB | ||||
Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
Noise Figure | ≤6dB | ||||
VSWR | ≤1.8 | ||||
Group Delay | ≤0.5μs | ||||
Frequency Stability | ≦ 0.01ppm | ||||
Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 | ||||
WCDMA Meet 3GPP TS 25.143 | |||||
CDMA Meet IS95 & CDMA2000 | |||||
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25. 143 | |||
Modulation Accuracy | ≦ 12.5% | ||||
PCDE | ≦ -35dB@Spreading Factor 256 | ||||
CDMA System | Rho | ρ> 0.980 | |||
ACPR | Meet I S95 & CDMA2000 | ||||
LED Alarm | Standard | ||||
Mechanical Specifications | Standard | ||||
I /O Port | N-Female | ||||
Impedance | 50 ohm | ||||
Operating Temperature | -25ºC~+55ºC | ||||
Environment Conditions | IP40 | ||||
Power Supply | Input AC90~264V |
Installation:
Our factory: