Specifications
Brand Name :
Lenolink
Model Number :
LSR20-lte
Certification :
ISO
Place of Origin :
China
MOQ :
5pcs
Price :
Negotiation
Supply Ability :
1000pcs/month
Packaging Details :
Packing with bracket 1 PC /box
output power :
20dBm
gain :
70dB
coverage :
1000sqm
frequency :
lte1800
Key words :
mobile phone signal booster
Description

Mobile Signal Repeater with LCD 20dBm Dual Bnad Wide Band 70dB Gain ceverage 1000


Description
This dual mobile phone signal amplifier significantly improves the performance of any cellular device experiencing weak signal inside of buildings! It provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. it can help reduce drop calls and improve GSM voice communication quality. Using a large external antenna and an indoor repeater, this GSM signal booster boosts signals sent by both your phone and the cell tower.

The dual band repeater supports any two wireless system at one housing. Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm.

Specification:

Electrical specification Uplink Downlink
Frequency Range GSM 880 ~ 915 MHz 935 ~ 960 MHz
WCDMA 1920 ~1980MHz 2110MHz ~2170MHz
Max .Gain ≥ 55dB ≥ 60dB
≥ 65dB ≥ 65dB
≥ 65dB ≥ 70dB
≥ 70dB ≥ 75dB
≥ 75dB ≥ 75dB
≥ 75dB ≥ 80dB
Max .Output Power ≥ 10dBm ≥ 10dBm
≥ 12dBm ≥ 15dBm
≥ 15dBm ≥ 20dBm
≥ 15dBm ≥ 23dBm
≥ 20dBm ≥ 27dBm
≥ 20dBm ≥ 30dBm
Band width (-3dB) Wide Band
MGC ≥ 31dB / 1dB step
ALC ≥ 15dB, auto shut off after 15dB
Gain Flatness GSM&CDMA Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P)
WCDMA ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P)
Noise Figure ≤6dB
VSWR ≤1.8
Group Delay ≤0.5μs
Frequency Stability ≦ 0.01ppm

Spurious Emission &
Output inter-modulation

GSM Meet ETSI TS 151 026
WCDMA Meet 3GPP TS 25.143
CDMA Meet IS95 & CDMA2000
WCDMA System Spurious Emission Mask Meet 3GPP TS 25. 143
Modulation Accuracy ≦ 12.5%
PCDE ≦ -35dB@Spreading Factor 256
CDMA System Rho ρ> 0.980
ACPR Meet I S95 & CDMA2000
LED Alarm Standard
Power LED Green light when power on.
ALC LED Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 seconds red color
Mechanical Specifications Standard
I /O Port N-Female
Impedance 50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions ≤20dBm 250x125x52mm;
>20dBm 250x220x52mm
Weight ≤20dBm ≤ 2.0Kg;
>20dBm ≤ 3.2Kg;
Power Supply Input AC90~264V


Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.

7. Metal housing, professional design.

8. Comply with CE and FCC standard.

Our factory:

70dB Gain Mobile Signal Repeater  20dBm Dual Bnad Manual Gain Control AC90~264V

Send your message to this supplier
Send Now

70dB Gain Mobile Signal Repeater 20dBm Dual Bnad Manual Gain Control AC90~264V

Ask Latest Price
Brand Name :
Lenolink
Model Number :
LSR20-lte
Certification :
ISO
Place of Origin :
China
MOQ :
5pcs
Price :
Negotiation
Contact Supplier
70dB Gain Mobile Signal Repeater  20dBm Dual Bnad Manual Gain Control AC90~264V

Lenolink Telecommunication Co.,Ltd

Active Member
8 Years
guangdong, shenzhen
Since 2014
Business Type :
Manufacturer
Total Annual :
3000000-5000000
Employee Number :
150~200
Certification Level :
Active Member
Contact Supplier
Submit Requirement