2000sqm Coverage Mobile Signal Repeater 23 DBm Cover 75dB Gain Good price
Description
Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm.
Consumer Repeater supports any mobile systems to help end users to improve mobile signals for better signal coverage. It is designed to support coverage area from 100 to 8000 sqm with proper engineering. The dual band repeater support two systems in one housing.
Specification:
Electrical specification | Uplink | Downlink | |||
Frequency Range | CDMA800 | 824 ~ 849 MHz | 869 ~ 894 MHz | ||
CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
GSM900 | 880 ~ 915 MHz | 925 ~ 960 MHz | |||
DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |||
PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |||
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |||
AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |||
LTE | 2500 ~ 2570 MHz | 2620 ~ 2690 MHz | |||
Max .Gain | ≥ 55dB | ≥ 60dB | |||
≥ 65dB | ≥ 65dB | ||||
≥ 65dB | ≥ 70dB | ||||
≥ 70dB | ≥ 75dB | ||||
Max .Output Power | ≥ 10dBm | ≥ 10dBm | |||
≥ 12dBm | ≥ 15dBm | ||||
≥ 15dBm | ≥ 20dBm | ||||
≥ 15dBm | ≥ 23dBm | ||||
Band width (-3dB) | Wide Band | ||||
ALC | ≥ 15dB, auto shut off after 15dB | ||||
Gain Flatness | GSM&CDMA | Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P) | |||
WCDMA | ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P) | ||||
Noise Figure | ≤7dB | ||||
VSWR | ≤2 | ||||
Group Delay | ≤0.5μs | ||||
Frequency Stability | ≦ 0.01ppm | ||||
LED Alarm | Standard | ||||
Mechanical Specifications | Standard | ||||
I /O Port | N-Female | ||||
Impedance | 50 ohm | ||||
Operating Temperature | -25ºC~+55ºC | ||||
Environment Conditions | IP40 | ||||
Power Supply | Input AC90~264V |
Design Advantage
1. Support wide band to cover all operators.
2. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
4. Very low power consumption.
Our factory: