Gold Plated RF RP SMA Female To 4x3.5mm Plain End For Test Probe
The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe permits the conversion of the voltages measured to current. Current measurements can be made over the frequency range shown in the transfer impedance curve furnished with each probe. There is virtually no loading of the circuit and the technique permits normal operation of the device under test during measurements.
Testing 5G NR requires innovative test and measurement approaches. New technologies such as massive MIMO (mMIMO), increased bandwidths and data rates and the introduction of mmWave frequencies require more computing power and robust RF hardware. They also make over-the-air (OTA) testing compulsory.
Product Name
|
DC-6GHz Wi-Fi 4G 5G test SMA connnector Microstrip Rf Probe
|
Model
|
RP-9S
|
Optional Frequency(GHz)
|
DC-6
|
Insertion loss ( dB)
|
0.40dB(DC to 3Ghz) ,
0.60dB(DC to 6GHz)
|
Standing-wave Ratio (VSWR)
|
1.35(DC to 3GHz),
1.40(DC to 6GHz)
|
Voltage Rating(Vr.m.s.)
|
250Max.
|
Dielectric Withstanding Voltage(AC)(Vr.m.s.)
|
1000
|
Insulation resistance(Ohms )
|
1000 Min
|
Contact Resistance
Center contact(Ohms )
|
50 Max
|
Contact Resistance
Outer conductor(Ohms )
|
15Max
|
Connector Type
|
SMA-Female
|
SMA Body
|
Brass /Gold plating
|
Body
|
Brass/ Gold plating
|
Insulator
|
PTFE
|
Center Contact
|
Beryllium copper/Gold plating
|
Outer Contact
|
Beryllium copper/Gold plating
|
Spring
|
Piano Wire/Gold plating
|
☀ RF coaxial cable connectors (7/16 DIN/N/TNC/BNC/FME/U.FL/IPEX/L9/SMA/SMB/MMCX/MCX/OEM) .
☀ We focus on coaxial cable and cable connectors.
☀ Our cables and cable connectors are built-in and shipped worldwide.
☀ RF cable connectors can be produced to be cable assemblies with many different cable types and custom lengths depending on your needs and applications.
☀ If you require a special RF cable assemblies configuration not found here, you can create your own RF cable assembly configuration by calling our sales department.
Radio frequency (HFS) and dipole test probes are used in a wide range of industries. They enable precise and replicable measurement of RF performance and contact resistance. High measurement accuracy, repeatability, and a long service life are essential for RF probes. In order to meet these requirements and ensure outstanding product quality of its RF probes, INGUN operates its own RF laboratory. Here production conditions are simulated while electrical and mechanical endurance tests are carried out to achieve optimum contacting.