Wireless RF led pixel controller SP101E

Support IC :APA102,APA104,SK6812,WS2811,WS2812B,WS2801,LPD8806,TM1804,TM1809,UCS1903,UCS9812.etc

Working voltage:DC5V,12V,

128 built-in program effects for multi color strip,

1. Features:

1. RF Remote control, with long distance,wire connection is simple and very easy to use;

2. Support almost every kind of one-wire or two-wire LED-DRIVER-IC ;(Can be customized)

3. With 100kinds of patterns,which are vivid and beautiful;

4. Each controller can control up to 2450 pixels;

5.Preventing reverse connection of power supply

2. Remote Control

1. Functions Of Each Button:

ON/OFF	To control the LED ON or OFF
MODE+	Switching patterns forwardly
MODE-	Switching patterns backwardly
SPEED+	Switching speed forwardly
SPEED-	Switching speed backwardly
AUTO	Run internal pattern automatically
NUM+	Add the number of pixels on each section
NUM-	Decreased the number of pixels on each section
SEC+	Add number of section.
SEC-	Decreased number of section.
MATCH	Match the Remote control with the receiving controller

2. Testing and Matching:

Pressing and hold the AUTO button for up to 3 seconds until LED is out, release the AUTO button to into the mode of switching in red,green,blue,yellow,purple,cyan and white,witch to test the your LED.

Pressing and hold the MATCH button for up to 3 seconds to match the Remote control with the receiving controller. Pressing and hold the MATCH button for up to 3 seconds to un-match.

3. Sections:

Some of the patterns run in several sections, each section is the same. User can make the number of sections as follow: 5, 10, 15, 20, 25, 30,35. Pixel number of each section can be chosen as follow: 20, 30, 40, 50, 60, 70 .

Sum of pixels = Sections*Number per section

4. User Setting Saving:

User’s each pressing on the button can be saved by the controller automatically. When the controller is power off, next time power up, it will work the way as the same as before.