32led 32ic individual control dmx512 led strip
Our dmx512 led strip is 5 way output ( 5V, PI/PO address writing wire, A(Dmx+),B(Dmx-),GND), Don't need decoder . as the MAX485 is inside the DMX512 IC ,It can be cut ,can be parallel and series connection .Much better than other dmx led strips.
All the strips can be the waterproof rate:
IP20 non waterproof:3M sticker on the back,
IP65 waterproof: Silcone gel or epoxy on the surface,
IP67 waterproof: Silicone tube,
IP68 waterproof: Siloicone gel inside silicone tube.
Pictures:
When writing the address for the strips,you just need a address writer,and connect the PI ,+5V and GND to the address writer,so the address is arranged.
For the connection:just connect the A to Dmx+,B to Dmx-,GND to GND,So it is controllable(below is the connection to our controller)
For you have dmx controllers,the connection of it are the same way,for it is standard dmx led strip ,fellowing the standard international dmx portol.
The connection of address writer to five cables dmx512 as below:
More Choice :
It can be 3cables,4cable,5cables,
DC5V 32IC 32LEDs individual controlled;
DC12V 10IC 30LEDs,1 control 3;
DC24V 10IC 60LEDs,1 control 6