128x128dot LED module P1.923 LED billboard screen high definition
Description:
246x246mm LED module
492x492mm LED panel cabinet
RGB full color LED display system
Kinglight LEDs,G-energy LED driver
Introduction:
1. Outdoor full-color LED large screen series, ultra-high pixel density, presenting a more high-definition picture effect.
2. High cost performance, while meeting your high-definition picture quality needs, it has a good cost performance, greatly reducing your investment cost;
3. High efficiency: LED large screen products use ultra-bright low-power drive LED, saving more than 20% of electricity, PFC circuit design with temperature control, display control, brightness control and other technologies, can achieve the overall energy saving effect of the product;
4. High protection level: unique chassis design, in line with IP protection standards, can be used for outdoor installation;
5. Standardized design: chassis, modules and other components adopt standardized design, different products are compatible, and the degree of standardization is high, which provides great convenience for production and maintenance;
Products Series:
Small pixel :P1.5--P1.667--P1.875--P1.9--P1.923--P2--P2.5--P2.98--P3--P3.91
Outdoor pixel series :P3.91--P4--P4.81--P5--P5.95--P6--P6.25--P6.67--P8--P10--P10.66--P16
Indoor pixel series:P3.91--P4--P4.81--P5--P5.95--P6--P6.25--P7.62--P10--P12.5
Advantages
Special heat dissipation design inside out led chip;
Great heat dissipation ability inside out from Drive IC;
Model cover and cabinet adopted die-casting aluminum material Improves the heat dissipation effect, and Drive IC is accompanied with cooling material outside;
Plus the high efficient power supply can decrease heat output;
Specifications :
outdoor DIP P1.923 | |||||
Resolution/mm | 1.923 | ||||
Pixel configuration | 1R1G1B | ||||
Pixel density/pixels/m² | 270420/m² | ||||
Module resolution | 128x128 | ||||
Module size/mm | 246x246mm | ||||
View distance | 14-300m | ||||
Single point brightness adjust | Can be added | ||||
Single point color adjust | Can be added | ||||
White balance brightness | >7500cd/㎡ | ||||
Color temperature | 6500K-9500K | ||||
Horizontal view angle | 120(degrees) | ||||
Vertical view angle | 60(degrees) | ||||
Signal Process bit | 10 or 16bit | ||||
Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 | ||||
Control distances | Internet cable:100m, multimembrane:500m, monofilm:2km | ||||
Driving mode | Constant driving current | ||||
Scanning mode | 1/30 SCANNING | ||||
Frame rate | 60Hz | ||||
Refresh frequency | >3000Hz | ||||
Control mode | Computer synchronous | ||||
Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted | ||||
255 steps. No grey loss | |||||
Out of control point | <1/10000 | ||||
Working hours | ≥72hours | ||||
Mean Time Between Failure | >5000hours | ||||
Life time | 100000hours | ||||
Life-all-white(brightness halving) | 50000hours | ||||
Environment temperature range | Operating temperature range: -20-45℃ | ||||
Self-check technology | LED spot self-check, communications check, power check, | ||||
temperature monitor(need customization) | |||||
Remote monitoring | Remote supervision and control, record potential fault, | ||||
send out warning signs to the operators.(need customization) | |||||
Software environment | WindowsNT,Windows1999,WindowsXP | ||||
Luminous point width between centres | Deviation<3% | ||||
Brightness uniformity | <10% | ||||
Color uniformity(chromaticity coordinate) | ±0.003 | ||||
Power supply request | AC85-264V(50Hz-60Hz) | ||||
Contrast | (1000:1) | ||||
System protection | Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration | ||||
Humidity(working) | working:10-95% | ||||
Humidity(storing) | storing:10-95% |
After-sale service:
1. Lifetime free maintenance and upgrade.
2. Complaint respond period not exceed 24 hours; maintenance guidance and problem solution supplied in 48 hours.
3. Customer satisfaction tracking report.
4. Free technician training.
5. Full set of documents free of charge, which including installation guidance, software operation manual, easy maintenance manual and control system software CD and so on.
6. Special service for big project, such as stadium, exhibitions, squares and so on.
FAQ
Q1.Can I have a sample order for the LED display?
A:Yes,we welcome sample orders to test and check quality.Both for the module or the whole screen.
Q2.What about the lead time?
A:Order less than 100 square meters lead time to take 15 working days
Q3.Do you have any MOQ limit for LED display orders?
A:Low MOQ,1 square meter or a module checking is available
Q4.How do you ship the goods and how long does it take to arrive?
A:We mostly accept EXW FOB CIF DDP and other shipping ways.It usually takes 20~30 days on the sea.a few days for customs clearance
Q5.How to proceed with an order for an LED display?
A:Firstly let us know your requirements or application.
Secondly,We quote according to your requirements or our suggestions.
Thirdly customer confirms the design document and places a deposit for the formal order.
Fourthly We arrange the production.
Q6.Is it OK to print my logo on the products?
A:Yes.Please inform us formally before our production and confirm the design firstly based on our sample.
Q7:Do you offer a guarantee for the products?
A:Yes,we offer 1-5 years warranty for our products.