SCX LED advertising fixed installation 7500cd high bright Nationstar SMD2727 P6 outdoor full color curved led screen
Outdoor P6 front service led display
1.High brightness and stable performance lead long lifespan and low power consumption.
2.Accurate color uniformity and smoother, flicker-free video displaying.
3.Wide viewing angle, high contrast, high brightness (adjustable), high intensity (14bit gradation processing), high refresh, softer image, display life like images to meet the high-speed motion picture display.
4.LED display production capacity per day: 50,000 pcs/day.
5.Strong R&D strength, 38000 square meter standard workshop.
Outdoor module Life is long, Stable, Save, High brightness
1.High protective dust waterproof and leakage.
2.Protection grade IP65 cabinets guidance before and after the glue tank panel cover circuit module to ensure worry-free.
3.Lamp bead reverse polarity, higher brightness, face to face with fierce can clear display screen.
MOQ and Sample
1.We welcome sample order to test and check quality .Mixed samples are acceptable.
2.Low MOQ,1 piece for sample checking is available.
3.Please inform us formally before our production and confirm the design firstly based on our sample.
Technical Parameters
Pixel Pitch | 6mm(H*V) |
Pixel Density | 27889dots/m2 |
LED Shape | SMD3535 |
LED Configuration | 1R1G1B |
Module Size | 192mmx192mm |
Driving Mode | 1/8Scan,constant current |
Cabinet Size | customized as the module size |
Cabinet Weight | 58kg/㎡ |
Brightness After Calibration | ≥5500cd/m2 |
Service access | Rear |
Contrast | 2000:1 |
View Angle | 140°(horz.), 140° (vert.) |
Max Power Consumption | 900 W/sq.m |
Average Power Consumption | 300 W/sq.m |
Best viewing distance | 6m-50m |
Gray Scale | 12-16bits for red,green,blue |
Colors | 16777216 |
Input voltage (AC) | 110V ~ 240V |
Frame Frequency | 50Hz-75Hz |
Refresh Rate | ≥600Hz |
Brightness Adjustment | 0-100% |
Gamma Correction | ( -0.5 -- 5.0 ) |
Color Temperature | 6500-9000K |
Operation System | Win7&XP |
Control Mode | Synchronization with PC or asynchronous wifi /3G |
Stock Temperature | (-40℃~+85℃) |
Operating Temperature | ( -30℃~+50℃ ) |
Operating Humidity | 10-90% RH |
Life Span | 100,000Hours |
MTBF | ≥10,000Hours |
IP Rating(Front/Rear) | IP65 |
Flatness of the screen | ≦1mm |
Control Distance | UTP CAT5E:100m,Multi-Mode Fiber:500m,Single-Mode Fiber:15km for Nova contorller,if 3g/wifi no distance require |
Our case
Product Description
Led display introduction:
1) High intensity and can be adjusted, so can meet the request of the customers according the application environment. 2) Best equality, commendably solve the problem of the mosaic, have the excellent consistency of light 3) To pictures and character, have clear, exquisite and real display effect 4) Big viewing angle to 110 degree at horizontal line, 60 degree at vertical line, you can see at every angle at this range, no picture change, no color excursion 5) Can repair each led lamps, so the cost of maintain is lower, and easy to repair.
Products Advantages:
1) Price Advantage: we have the best competitive price at the market, also have the same even better quality. 2) Performance Advantage: Best Equality, high consistency, Big viewing angle, can repair each led lamps 3) Quality advantage: From material to finished product, from design to produce, we control all steps, that's the guarantee of the quality and reliability. 4) Service advantage: Better service at same situation, better cooperation at same service!
Products application area:
1) Full color LED display : Equally or compactly make the red, green, blue color in one dot, equally distribute at the panel, so make the whole display 2) Usually apply for physical sports, advertisement, bank, stock exchange, station, port, marketplace, telecommunication, department, school, monitor, restaurant, entertainment
Remark:
1.The Mosaic: suitable for smaller indoor screen. Due to the small space, in order to do not take up space, according to the screen size on the wall to dig out the area of the same size, the LED display embedded in the wall. Wall for the solid wall. With the method of before the maintenance, the cost is higher.
2. The wall: more suitable for the installation of indoor LED display, smaller (below 10 square meters), wall is solid walls, hollow bricks or simple retaining wall are not suitable for the installation.
3. Hanging: more suitable for the station LED display, LED display at the airport and other places of large signage. Request screen area is lesser. (below 10 square meter) requirements and must have the appropriate installation location, such as beams or columns above, and the screen body in general to add back cover.
4. Pillar type: used for the installation of outdoor advertising LED display, eye shot is open, around the place empty, such as square, parking lot, etc. According to the size of the screen area and can be divided into the installation of single column and double column type.
5. Roof type: mainly applied to outdoor advertising LED display, the installation location is mainly the roof of the building, with the increase of building height to consider windproof level along with the increase.
Our Service
1.We emphasize on complete customer satisfaction and to achieve this, we have maintained a dedicated Service and Sales Management Team.
2.Our team comprises of highly seasoned engineers that offer complete assistance right through the installation process.
3. We ensure twenty four hour connectivity through email and on-line chat and as such, customers get instant solution to their queries.
4.Customers can contact us anytime for post sale assistance. We joint efforts and bring the best for our customers.
Application case
SCREE Outdoor P6 front service led display project case
Outdoor LED display is widely used in various outdoor events, including airport information display, stadium advertisement and score board, concerts and performance stages, highway billboards, shopping malls, residential quarter boards, schools, government, trade fair, exhibition and variety of public places.
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than.
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.